changes to home-assistant and nb

esphome/bathroom-switch-1.yaml

@@ -0,0 +1,143 @@
+substitutions:
+  devicename: bathroom-switch-1
+  # Name for the relays
+  channel_1: Light
+  channel_2: Air
+  max_power: "2000.0" # watt
+  max_temp: "80.0" # °C
+
+esphome:
+  name: ${devicename}
+  platform: ESP8266
+  board: esp01_1m
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+# Enable Home Assistant API
+api:
+
+i2c:
+  sda: GPIO12
+  scl: GPIO14
+
+sensor:
+  - platform: ade7953_i2c
+    voltage:
+      name: ${devicename} voltage
+    current_a:
+      name: ${channel_2} current
+      internal: true
+    current_b:
+      name: ${channel_1} current
+      internal: true
+    active_power_a:
+      name: ${channel_2} power
+      id: power_channel_2
+      filters:
+        - multiply: 1
+      on_value_range:
+        - above: ${max_power}
+          then:
+            - output.turn_off: shelly_25_relay_2
+            - homeassistant.service:
+                service: persistent_notification.create
+                data:
+                  title: Message from ${devicename}
+                data_template:
+                  message: Switch turned off because power exceeded ${max_power}W
+    active_power_b:
+      name: ${channel_1} power
+      id: power_channel_1
+      filters:
+        - multiply: -1
+      on_value_range:
+        - above: ${max_power}
+          then:
+            - output.turn_off: shelly_25_relay_1
+            - homeassistant.service:
+                service: persistent_notification.create
+                data:
+                  title: Message from ${devicename}
+                data_template:
+                  message: Switch turned off because power exceeded ${max_power}W
+    update_interval: 30s
+
+  # NTC Temperature
+  - platform: ntc
+    sensor: temp_resistance_reading
+    name: ${devicename} temperature
+    unit_of_measurement: "°C"
+    accuracy_decimals: 1
+    icon: "mdi:thermometer"
+    calibration:
+      b_constant: 3350
+      reference_resistance: 10kOhm
+      reference_temperature: 298.15K
+    on_value_range:
+      - above: ${max_temp}
+        then:
+          - output.turn_off: shelly_25_relay_1
+          - output.turn_off: shelly_25_relay_2
+          - homeassistant.service:
+              service: persistent_notification.create
+              data:
+                title: Message from ${devicename}
+              data_template:
+                message: Switch turned off because temperature exceeded ${max_temp}°C
+  - platform: resistance
+    id: temp_resistance_reading
+    sensor: temp_analog_reading
+    configuration: DOWNSTREAM
+    resistor: 32kOhm
+  - platform: adc
+    id: temp_analog_reading
+    pin: A0
+
+status_led:
+  pin:
+    number: GPIO0
+    inverted: yes
+
+output:
+  - platform: gpio
+    pin: GPIO4
+    id: shelly_25_relay_1
+  - platform: gpio
+    pin: GPIO15
+    id: shelly_25_relay_2
+
+light:
+  - platform: binary
+    name: "${channel_1}"
+    output: shelly_25_relay_1
+    id: lightid
+  - platform: binary
+    name: "${channel_2}"
+    output: shelly_25_relay_2
+    id: airid
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO13
+    name: "${channel_1} input"
+    internal: true
+    on_state:
+      then:
+        - light.toggle: lightid
+  - platform: gpio
+    pin:
+      number: GPIO5
+    name: "${channel_2} input"
+    internal: true
+    on_state:
+      then:
+        - light.toggle: airid
+
+  # Prevent short circuit with "floating" pin!
+  - platform: gpio
+    pin: GPIO16
+    name: "ade7953 IRQ pin"
+    internal: true