feat: add disks to nas

hosts/nas/modules/disk-monitoring.nix

@@ -9,6 +9,10 @@ let
   disks = [
     "/dev/disk/by-id/ata-ST18000NM000J-2TV103_ZR52TBSB"
     "/dev/disk/by-id/ata-ST18000NM000J-2TV103_ZR52V9QX"
+    "/dev/disk/by-id/ata-TOSHIBA_MG10ACA20TE_8582A01SF4MJ"
+    "/dev/disk/by-id/ata-TOSHIBA_MG10ACA20TE_75V2A0H3F4MJ"
+    "/dev/disk/by-id/nvme-KIOXIA-EXCERIA_PLUS_G3_SSD_7FJKS1MAZ0E7"
+    "/dev/disk/by-id/nvme-KIOXIA-EXCERIA_PLUS_G3_SSD_7FJKS1M9Z0E7"
   ];
 
   textfileDir = "/var/lib/prometheus-node-exporter";
@@ -44,8 +48,8 @@ let
       device=$(readlink -f "$disk")
       short_name=$(basename "$device")
 
-      # Extract serial from disk ID for labels
-      serial=$(basename "$disk" | sed 's/ata-ST18000NM000J-2TV103_//')
+      # Extract serial from disk ID for labels (part after last underscore)
+      serial=$(basename "$disk" | sed 's/.*_//')
 
       # Check power state without waking disk
       power_state=$(${pkgs.hdparm}/bin/hdparm -C "$device" 2>/dev/null | grep -oP '(standby|active/idle|active|idle)' | head -1 || echo "unknown")

hosts/nas/modules/power-management.nix

@@ -15,5 +15,10 @@
     ACTION=="add", KERNEL=="sd[a-z]", SUBSYSTEM=="block", \
       ATTRS{model}=="ST18000NM000J*", \
       RUN+="${pkgs.hdparm}/bin/hdparm -B 127 -S 180 /dev/%k"
+
+    # Toshiba 20TB NAS drives - same settings
+    ACTION=="add", KERNEL=="sd[a-z]", SUBSYSTEM=="block", \
+      ATTRS{model}=="TOSHIBA MG10ACA20TE*", \
+      RUN+="${pkgs.hdparm}/bin/hdparm -B 127 -S 180 /dev/%k"
   '';
 }