feat: esphome updates

esphome/README.md

@@ -6,4 +6,4 @@ https://github.com/tasmota/mgos32-to-tasmota32/releases
 In Tasmota make OTA Update to minimal:
 http://ota.tasmota.com/tasmota/release/tasmota-minimal.bin.gz
 Make ESPHome Configuration in Dashboard:
-docker run --rm -p 6052:6052 -e ESPHOME_DASHBOARD_USE_PING=true -v "${PWD}":/config -it ghcr.io/esphome/esphome
+docker run --rm -p 6052:6052 -e ESPHOME_DASHBOARD_USE_PING=true -v "${PWD}":/config -it ghcr.io/esphome/esphome:latest

esphome/archive/install.yaml

@@ -0,0 +1,19 @@
+substitutions:
+  device_name: "install"
+  friendly_name: "Esphome Install"
+
+esphome:
+  name: ${device_name}
+  comment: ${friendly_name}
+  platform: ESP8266
+  board: esp01_1m
+
+web_server:
+  port: 80
+
+ota:
+  platform: esphome
+
+wifi:
+  ssid: Cloonar-Smart
+  password: 0m6sY7Ue3G31

esphome/bathroom-bulb-1.yaml

@@ -5,8 +5,6 @@ substitutions:
 esphome:
   name: ${device_name}
   comment: ${friendly_name}
-  platform: ESP8266
-  board: esp01_1m
   on_boot:
     priority: 300
     then:
@@ -24,6 +22,9 @@ esphome:
           blue: 0%
           white: 100%
 
+esp8266:
+  board: esp01_1m
+          
 interval:
   - interval: 15s
     then:
@@ -37,6 +38,7 @@ interval:
 
 # Enable Home Assistant API
 api:
+  batch_delay: 0ms
 
 ota:
   platform: esphome

esphome/bathroom-bulb-2.yaml

@@ -5,8 +5,6 @@ substitutions:
 esphome:
   name: ${device_name}
   comment: ${friendly_name}
-  platform: ESP8266
-  board: esp01_1m
   on_boot:
     priority: 300
     then:
@@ -24,6 +22,9 @@ esphome:
           blue: 0%
           white: 100%
 
+esp8266:
+  board: esp01_1m
+          
 interval:
   - interval: 15s
     then:
@@ -37,6 +38,7 @@ interval:
 
 # Enable Home Assistant API
 api:
+  batch_delay: 0ms
 
 ota:
   platform: esphome

esphome/bedroom-bulb-1.yaml

@@ -5,8 +5,6 @@ substitutions:
 esphome:
   name: ${device_name}
   comment: ${friendly_name}
-  platform: ESP8266
-  board: esp01_1m
   on_boot:
     priority: 300
     then:
@@ -24,6 +22,9 @@ esphome:
           blue: 0%
           white: 100%
 
+esp8266:
+  board: esp01_1m
+          
 interval:
   - interval: 15s
     then:
@@ -37,6 +38,7 @@ interval:
 
 # Enable Home Assistant API
 api:
+  batch_delay: 0ms
 
 ota:
   platform: esphome

esphome/bedroom-bulb-2.yaml

@@ -5,8 +5,6 @@ substitutions:
 esphome:
   name: ${device_name}
   comment: ${friendly_name}
-  platform: ESP8266
-  board: esp01_1m
   on_boot:
     priority: 300
     then:
@@ -24,6 +22,9 @@ esphome:
           blue: 0%
           white: 100%
 
+esp8266:
+  board: esp01_1m
+          
 interval:
   - interval: 15s
     then:
@@ -37,6 +38,7 @@ interval:
 
 # Enable Home Assistant API
 api:
+  batch_delay: 0ms
 
 ota:
   platform: esphome

esphome/bedroom-bulb-3.yaml

@@ -5,8 +5,6 @@ substitutions:
 esphome:
   name: ${device_name}
   comment: ${friendly_name}
-  platform: ESP8266
-  board: esp01_1m
   on_boot:
     priority: 300
     then:
@@ -24,6 +22,9 @@ esphome:
           blue: 0%
           white: 100%
 
+esp8266:
+  board: esp01_1m
+          
 interval:
   - interval: 15s
     then:
@@ -37,6 +38,7 @@ interval:
 
 # Enable Home Assistant API
 api:
+  batch_delay: 0ms
 
 ota:
   platform: esphome

esphome/bedroom-bulb-4.yaml

@@ -5,8 +5,6 @@ substitutions:
 esphome:
   name: ${device_name}
   comment: ${friendly_name}
-  platform: ESP8266
-  board: esp01_1m
   on_boot:
     priority: 300
     then:
@@ -24,6 +22,9 @@ esphome:
           blue: 0%
           white: 100%
 
+esp8266:
+  board: esp01_1m
+          
 interval:
   - interval: 15s
     then:
@@ -37,6 +38,7 @@ interval:
 
 # Enable Home Assistant API
 api:
+  batch_delay: 0ms
 
 ota:
   platform: esphome

esphome/hallway-bulb-1.yaml

@@ -5,8 +5,6 @@ substitutions:
 esphome:
   name: ${device_name}
   comment: ${friendly_name}
-  platform: ESP8266
-  board: esp01_1m
   on_boot:
     priority: 300
     then:
@@ -24,6 +22,9 @@ esphome:
           blue: 0%
           white: 100%
 
+esp8266:
+  board: esp01_1m
+          
 interval:
   - interval: 15s
     then:
@@ -37,6 +38,7 @@ interval:
 
 # Enable Home Assistant API
 api:
+  batch_delay: 0ms
 
 ota:
   platform: esphome

esphome/hallway-bulb-2.yaml

@@ -5,8 +5,6 @@ substitutions:
 esphome:
   name: ${device_name}
   comment: ${friendly_name}
-  platform: ESP8266
-  board: esp01_1m
   on_boot:
     priority: 300
     then:
@@ -24,6 +22,9 @@ esphome:
           blue: 0%
           white: 100%
 
+esp8266:
+  board: esp01_1m
+          
 interval:
   - interval: 15s
     then:
@@ -37,6 +38,7 @@ interval:
 
 # Enable Home Assistant API
 api:
+  batch_delay: 0ms
 
 ota:
   platform: esphome

esphome/livingroom-bulb-1.yaml

@@ -56,13 +56,14 @@ preferences:
   flash_write_interval: 1min
 
 api:
+  batch_delay: 0ms
 
 ota:
   - platform: esphome
 
 wifi:
   # Disable fast_connect so we do a full scan (required for hidden SSIDs)
-  fast_connect: false
+  fast_connect: True
   domain: "${dns_domain}"
 
   # Your hidden network
@@ -84,7 +85,6 @@ wifi:
     ssid: "${name}_AP"
     password: "bulb_fallback_pw"
     ap_timeout: 2min     # after 2 min of failed join, enable AP
-  reboot_timeout: 5min  # if still not joined after 5 min, reboot and retry
 
 binary_sensor:
   - platform: status

esphome/livingroom-bulb-2.yaml

@@ -10,7 +10,6 @@ substitutions:
   sntp_server_1: "0.pool.ntp.org"
   sntp_server_2: "1.pool.ntp.org"
   sntp_server_3: "2.pool.ntp.org"
-  log_level: "WARN"
 
 esphome:
   name: "${name}"
@@ -23,27 +22,27 @@ esphome:
     name: "${project_name}"
     version: "${project_version}"
   on_boot:
-      then:
+    then:
-        - light.turn_on: 
+      - light.turn_on: 
-            id: rgbww_light
+          id: rgbww_light
-        - delay: 100ms
+      - delay: 100ms
-        - light.turn_on:
+      - light.turn_on:
-            id: rgbww_light
+          id: rgbww_light
-            brightness: 20%
+          brightness: 20%
-        - delay: 100ms
+      - delay: 100ms
-        - light.turn_on:
+      - light.turn_on:
-            id: rgbww_light
+          id: rgbww_light
-            red: 100%
+          red: 100%
-            green: 50%
+          green: 50%
-            blue: 0%
+          blue: 0%
-            white: 100%
+          white: 100%
 
 interval:
   - interval: 15s
     then:
       - if:
           condition:
-            api.connected: # check if api connected
+            api.connected:
           else:
             - light.turn_on:
                 id: rgbww_light
@@ -57,22 +56,35 @@ preferences:
   flash_write_interval: 1min
 
 api:
+  batch_delay: 0ms
 
 ota:
   - platform: esphome
 
 wifi:
-  domain: .cloonar.smart
+  # Disable fast_connect so we do a full scan (required for hidden SSIDs)
-  fast_connect: False
+  fast_connect: True
+  domain: "${dns_domain}"
+
+  # Your hidden network
   networks: 
     - ssid: !secret wifi_ssid
       password: !secret wifi_password
       channel: 1
-      hidden: True
+      hidden: true
+
   manual_ip:
     static_ip: 10.42.100.12
     gateway: 10.42.100.1
     subnet: 255.255.255.0
+    dns1: 8.8.8.8
+    dns2: 1.1.1.1
+
+  # Fallback access point if Wi-Fi fails
+  ap:
+    ssid: "${name}_AP"
+    password: "bulb_fallback_pw"
+    ap_timeout: 2min     # after 2 min of failed join, enable AP
 
 binary_sensor:
   - platform: status
@@ -90,7 +102,7 @@ sensor:
     name: "WiFi Signal dB"
     id: wifi_signal_db
     update_interval: 60s
-    entity_category: "diagnostic"
+    entity_category: diagnostic
 
   - platform: copy
     source_id: wifi_signal_db
@@ -98,8 +110,7 @@ sensor:
     filters:
       - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
     unit_of_measurement: "Signal %"
-    entity_category: "diagnostic"
+    entity_category: diagnostic
-    device_class: ""
 
 output:
   - platform: esp8266_pwm
@@ -153,55 +164,47 @@ text_sensor:
       name: "Mac Address"
       entity_category: diagnostic
 
-  #  Creates a sensor showing when the device was last restarted
   - platform: template
     name: 'Last Restart'
     id: device_last_restart
     icon: mdi:clock
     entity_category: diagnostic
-#    device_class: timestamp
 
-  #  Creates a sensor of the uptime of the device, in formatted days, hours, minutes and seconds
   - platform: template
     name: "Uptime"
     entity_category: diagnostic
     lambda: |-
       int seconds = (id(uptime_sensor).state);
       int days = seconds / (24 * 3600);
-      seconds = seconds % (24 * 3600);
+      seconds %= (24 * 3600);
       int hours = seconds / 3600;
-      seconds = seconds % 3600;
+      seconds %= 3600;
-      int minutes = seconds /  60;
+      int minutes = seconds / 60;
-      seconds = seconds % 60;
+      seconds %= 60;
-      if ( days > 3650 ) {
+      if (days > 3650) {
         return { "Starting up" };
-      } else if ( days ) {
+      } else if (days) {
-        return { (String(days) +"d " + String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
+        return { (String(days) + "d " + String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
-      } else if ( hours ) {
+      } else if (hours) {
-        return { (String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
+        return { (String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
-      } else if ( minutes ) {
+      } else if (minutes) {
-        return { (String(minutes) +"m "+ String(seconds) +"s").c_str() };
+        return { (String(minutes) + "m " + String(seconds) + "s").c_str() };
       } else {
-        return { (String(seconds) +"s").c_str() };
+        return { (String(seconds) + "s").c_str() };
       }
     icon: mdi:clock-start
 
 time:
   - platform: sntp
     id: sntp_time
-  # Define the timezone of the device
     timezone: "${timezone}"
-  # Change sync interval from default 5min to 6 hours (or as set in substitutions)
     update_interval: ${sntp_update_interval}
-  # Set specific sntp servers to use
     servers:
       - "${sntp_server_1}"
       - "${sntp_server_2}"
       - "${sntp_server_3}"
-  # Publish the time the device was last restarted
     on_time_sync:
       then:
-        # Update last restart time, but only once.
         - if:
             condition:
               lambda: 'return id(device_last_restart).state == "";'

esphome/livingroom-bulb-3.yaml

@@ -10,18 +10,6 @@ substitutions:
   sntp_server_1: "0.pool.ntp.org"
   sntp_server_2: "1.pool.ntp.org"
   sntp_server_3: "2.pool.ntp.org"
-  log_level: "WARN"
-
-globals:
-  - id: fast_boot
-    type: int
-    restore_value: yes
-    initial_value: '0'
-
-  - id: restore_mode
-    type: int
-    restore_value: yes
-    initial_value: "1"
 
 esphome:
   name: "${name}"
@@ -34,27 +22,27 @@ esphome:
     name: "${project_name}"
     version: "${project_version}"
   on_boot:
-      then:
+    then:
-        - light.turn_on: 
+      - light.turn_on: 
-            id: rgbww_light
+          id: rgbww_light
-        - delay: 100ms
+      - delay: 100ms
-        - light.turn_on:
+      - light.turn_on:
-            id: rgbww_light
+          id: rgbww_light
-            brightness: 20%
+          brightness: 20%
-        - delay: 100ms
+      - delay: 100ms
-        - light.turn_on:
+      - light.turn_on:
-            id: rgbww_light
+          id: rgbww_light
-            red: 100%
+          red: 100%
-            green: 50%
+          green: 50%
-            blue: 0%
+          blue: 0%
-            white: 100%
+          white: 100%
 
 interval:
   - interval: 15s
     then:
       - if:
           condition:
-            api.connected: # check if api connected
+            api.connected:
           else:
             - light.turn_on:
                 id: rgbww_light
@@ -68,22 +56,35 @@ preferences:
   flash_write_interval: 1min
 
 api:
+  batch_delay: 0ms
 
 ota:
   - platform: esphome
 
 wifi:
-  domain: .cloonar.smart
+  # Disable fast_connect so we do a full scan (required for hidden SSIDs)
-  fast_connect: False
+  fast_connect: True
+  domain: "${dns_domain}"
+
+  # Your hidden network
   networks: 
     - ssid: !secret wifi_ssid
       password: !secret wifi_password
-      hidden: True
       channel: 1
+      hidden: true
+
   manual_ip:
     static_ip: 10.42.100.13
     gateway: 10.42.100.1
     subnet: 255.255.255.0
+    dns1: 8.8.8.8
+    dns2: 1.1.1.1
+
+  # Fallback access point if Wi-Fi fails
+  ap:
+    ssid: "${name}_AP"
+    password: "bulb_fallback_pw"
+    ap_timeout: 2min     # after 2 min of failed join, enable AP
 
 binary_sensor:
   - platform: status
@@ -101,7 +102,7 @@ sensor:
     name: "WiFi Signal dB"
     id: wifi_signal_db
     update_interval: 60s
-    entity_category: "diagnostic"
+    entity_category: diagnostic
 
   - platform: copy
     source_id: wifi_signal_db
@@ -109,8 +110,7 @@ sensor:
     filters:
       - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
     unit_of_measurement: "Signal %"
-    entity_category: "diagnostic"
+    entity_category: diagnostic
-    device_class: ""
 
 output:
   - platform: esp8266_pwm
@@ -164,55 +164,47 @@ text_sensor:
       name: "Mac Address"
       entity_category: diagnostic
 
-  #  Creates a sensor showing when the device was last restarted
   - platform: template
     name: 'Last Restart'
     id: device_last_restart
     icon: mdi:clock
     entity_category: diagnostic
-#    device_class: timestamp
 
-  #  Creates a sensor of the uptime of the device, in formatted days, hours, minutes and seconds
   - platform: template
     name: "Uptime"
     entity_category: diagnostic
     lambda: |-
       int seconds = (id(uptime_sensor).state);
       int days = seconds / (24 * 3600);
-      seconds = seconds % (24 * 3600);
+      seconds %= (24 * 3600);
       int hours = seconds / 3600;
-      seconds = seconds % 3600;
+      seconds %= 3600;
-      int minutes = seconds /  60;
+      int minutes = seconds / 60;
-      seconds = seconds % 60;
+      seconds %= 60;
-      if ( days > 3650 ) {
+      if (days > 3650) {
         return { "Starting up" };
-      } else if ( days ) {
+      } else if (days) {
-        return { (String(days) +"d " + String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
+        return { (String(days) + "d " + String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
-      } else if ( hours ) {
+      } else if (hours) {
-        return { (String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
+        return { (String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
-      } else if ( minutes ) {
+      } else if (minutes) {
-        return { (String(minutes) +"m "+ String(seconds) +"s").c_str() };
+        return { (String(minutes) + "m " + String(seconds) + "s").c_str() };
       } else {
-        return { (String(seconds) +"s").c_str() };
+        return { (String(seconds) + "s").c_str() };
       }
     icon: mdi:clock-start
 
 time:
   - platform: sntp
     id: sntp_time
-  # Define the timezone of the device
     timezone: "${timezone}"
-  # Change sync interval from default 5min to 6 hours (or as set in substitutions)
     update_interval: ${sntp_update_interval}
-  # Set specific sntp servers to use
     servers:
       - "${sntp_server_1}"
       - "${sntp_server_2}"
       - "${sntp_server_3}"
-  # Publish the time the device was last restarted
     on_time_sync:
       then:
-        # Update last restart time, but only once.
         - if:
             condition:
               lambda: 'return id(device_last_restart).state == "";'

esphome/livingroom-bulb-4.yaml

@@ -10,18 +10,6 @@ substitutions:
   sntp_server_1: "0.pool.ntp.org"
   sntp_server_2: "1.pool.ntp.org"
   sntp_server_3: "2.pool.ntp.org"
-  log_level: "WARN"
-
-globals:
-  - id: fast_boot
-    type: int
-    restore_value: yes
-    initial_value: '0'
-
-  - id: restore_mode
-    type: int
-    restore_value: yes
-    initial_value: "1"
 
 esphome:
   name: "${name}"
@@ -34,27 +22,27 @@ esphome:
     name: "${project_name}"
     version: "${project_version}"
   on_boot:
-      then:
+    then:
-        - light.turn_on: 
+      - light.turn_on: 
-            id: rgbww_light
+          id: rgbww_light
-        - delay: 100ms
+      - delay: 100ms
-        - light.turn_on:
+      - light.turn_on:
-            id: rgbww_light
+          id: rgbww_light
-            brightness: 20%
+          brightness: 20%
-        - delay: 100ms
+      - delay: 100ms
-        - light.turn_on:
+      - light.turn_on:
-            id: rgbww_light
+          id: rgbww_light
-            red: 100%
+          red: 100%
-            green: 50%
+          green: 50%
-            blue: 0%
+          blue: 0%
-            white: 100%
+          white: 100%
 
 interval:
   - interval: 15s
     then:
       - if:
           condition:
-            api.connected: # check if api connected
+            api.connected:
           else:
             - light.turn_on:
                 id: rgbww_light
@@ -68,21 +56,35 @@ preferences:
   flash_write_interval: 1min
 
 api:
+  batch_delay: 0ms
 
 ota:
   - platform: esphome
 
 wifi:
-  domain: .cloonar.smart
+  # Disable fast_connect so we do a full scan (required for hidden SSIDs)
-  fast_connect: False
+  fast_connect: True
+  domain: "${dns_domain}"
+
+  # Your hidden network
   networks: 
     - ssid: !secret wifi_ssid
       password: !secret wifi_password
-      hidden: True
+      channel: 1
+      hidden: true
+
   manual_ip:
     static_ip: 10.42.100.14
     gateway: 10.42.100.1
     subnet: 255.255.255.0
+    dns1: 8.8.8.8
+    dns2: 1.1.1.1
+
+  # Fallback access point if Wi-Fi fails
+  ap:
+    ssid: "${name}_AP"
+    password: "bulb_fallback_pw"
+    ap_timeout: 2min     # after 2 min of failed join, enable AP
 
 binary_sensor:
   - platform: status
@@ -100,7 +102,7 @@ sensor:
     name: "WiFi Signal dB"
     id: wifi_signal_db
     update_interval: 60s
-    entity_category: "diagnostic"
+    entity_category: diagnostic
 
   - platform: copy
     source_id: wifi_signal_db
@@ -108,8 +110,7 @@ sensor:
     filters:
       - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
     unit_of_measurement: "Signal %"
-    entity_category: "diagnostic"
+    entity_category: diagnostic
-    device_class: ""
 
 output:
   - platform: esp8266_pwm
@@ -163,55 +164,47 @@ text_sensor:
       name: "Mac Address"
       entity_category: diagnostic
 
-  #  Creates a sensor showing when the device was last restarted
   - platform: template
     name: 'Last Restart'
     id: device_last_restart
     icon: mdi:clock
     entity_category: diagnostic
-#    device_class: timestamp
 
-  #  Creates a sensor of the uptime of the device, in formatted days, hours, minutes and seconds
   - platform: template
     name: "Uptime"
     entity_category: diagnostic
     lambda: |-
       int seconds = (id(uptime_sensor).state);
       int days = seconds / (24 * 3600);
-      seconds = seconds % (24 * 3600);
+      seconds %= (24 * 3600);
       int hours = seconds / 3600;
-      seconds = seconds % 3600;
+      seconds %= 3600;
-      int minutes = seconds /  60;
+      int minutes = seconds / 60;
-      seconds = seconds % 60;
+      seconds %= 60;
-      if ( days > 3650 ) {
+      if (days > 3650) {
         return { "Starting up" };
-      } else if ( days ) {
+      } else if (days) {
-        return { (String(days) +"d " + String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
+        return { (String(days) + "d " + String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
-      } else if ( hours ) {
+      } else if (hours) {
-        return { (String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
+        return { (String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
-      } else if ( minutes ) {
+      } else if (minutes) {
-        return { (String(minutes) +"m "+ String(seconds) +"s").c_str() };
+        return { (String(minutes) + "m " + String(seconds) + "s").c_str() };
       } else {
-        return { (String(seconds) +"s").c_str() };
+        return { (String(seconds) + "s").c_str() };
       }
     icon: mdi:clock-start
 
 time:
   - platform: sntp
     id: sntp_time
-  # Define the timezone of the device
     timezone: "${timezone}"
-  # Change sync interval from default 5min to 6 hours (or as set in substitutions)
     update_interval: ${sntp_update_interval}
-  # Set specific sntp servers to use
     servers:
       - "${sntp_server_1}"
       - "${sntp_server_2}"
       - "${sntp_server_3}"
-  # Publish the time the device was last restarted
     on_time_sync:
       then:
-        # Update last restart time, but only once.
         - if:
             condition:
               lambda: 'return id(device_last_restart).state == "";'

esphome/livingroom-bulb-5.yaml

@@ -10,18 +10,6 @@ substitutions:
   sntp_server_1: "0.pool.ntp.org"
   sntp_server_2: "1.pool.ntp.org"
   sntp_server_3: "2.pool.ntp.org"
-  log_level: "WARN"
-
-globals:
-  - id: fast_boot
-    type: int
-    restore_value: yes
-    initial_value: '0'
-
-  - id: restore_mode
-    type: int
-    restore_value: yes
-    initial_value: "1"
 
 esphome:
   name: "${name}"
@@ -34,27 +22,27 @@ esphome:
     name: "${project_name}"
     version: "${project_version}"
   on_boot:
-      then:
+    then:
-        - light.turn_on: 
+      - light.turn_on: 
-            id: rgbww_light
+          id: rgbww_light
-        - delay: 100ms
+      - delay: 100ms
-        - light.turn_on:
+      - light.turn_on:
-            id: rgbww_light
+          id: rgbww_light
-            brightness: 20%
+          brightness: 20%
-        - delay: 100ms
+      - delay: 100ms
-        - light.turn_on:
+      - light.turn_on:
-            id: rgbww_light
+          id: rgbww_light
-            red: 100%
+          red: 100%
-            green: 50%
+          green: 50%
-            blue: 0%
+          blue: 0%
-            white: 100%
+          white: 100%
 
 interval:
   - interval: 15s
     then:
       - if:
           condition:
-            api.connected: # check if api connected
+            api.connected:
           else:
             - light.turn_on:
                 id: rgbww_light
@@ -68,21 +56,35 @@ preferences:
   flash_write_interval: 1min
 
 api:
+  batch_delay: 0ms
 
 ota:
   - platform: esphome
 
 wifi:
-  domain: .cloonar.smart
+  # Disable fast_connect so we do a full scan (required for hidden SSIDs)
-  fast_connect: False
+  fast_connect: True
+  domain: "${dns_domain}"
+
+  # Your hidden network
   networks: 
     - ssid: !secret wifi_ssid
       password: !secret wifi_password
-      hidden: True
+      channel: 1
+      hidden: true
+
   manual_ip:
     static_ip: 10.42.100.15
     gateway: 10.42.100.1
     subnet: 255.255.255.0
+    dns1: 8.8.8.8
+    dns2: 1.1.1.1
+
+  # Fallback access point if Wi-Fi fails
+  ap:
+    ssid: "${name}_AP"
+    password: "bulb_fallback_pw"
+    ap_timeout: 2min     # after 2 min of failed join, enable AP
 
 binary_sensor:
   - platform: status
@@ -100,7 +102,7 @@ sensor:
     name: "WiFi Signal dB"
     id: wifi_signal_db
     update_interval: 60s
-    entity_category: "diagnostic"
+    entity_category: diagnostic
 
   - platform: copy
     source_id: wifi_signal_db
@@ -108,8 +110,7 @@ sensor:
     filters:
       - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
     unit_of_measurement: "Signal %"
-    entity_category: "diagnostic"
+    entity_category: diagnostic
-    device_class: ""
 
 output:
   - platform: esp8266_pwm
@@ -163,55 +164,47 @@ text_sensor:
       name: "Mac Address"
       entity_category: diagnostic
 
-  #  Creates a sensor showing when the device was last restarted
   - platform: template
     name: 'Last Restart'
     id: device_last_restart
     icon: mdi:clock
     entity_category: diagnostic
-#    device_class: timestamp
 
-  #  Creates a sensor of the uptime of the device, in formatted days, hours, minutes and seconds
   - platform: template
     name: "Uptime"
     entity_category: diagnostic
     lambda: |-
       int seconds = (id(uptime_sensor).state);
       int days = seconds / (24 * 3600);
-      seconds = seconds % (24 * 3600);
+      seconds %= (24 * 3600);
       int hours = seconds / 3600;
-      seconds = seconds % 3600;
+      seconds %= 3600;
-      int minutes = seconds /  60;
+      int minutes = seconds / 60;
-      seconds = seconds % 60;
+      seconds %= 60;
-      if ( days > 3650 ) {
+      if (days > 3650) {
         return { "Starting up" };
-      } else if ( days ) {
+      } else if (days) {
-        return { (String(days) +"d " + String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
+        return { (String(days) + "d " + String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
-      } else if ( hours ) {
+      } else if (hours) {
-        return { (String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
+        return { (String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
-      } else if ( minutes ) {
+      } else if (minutes) {
-        return { (String(minutes) +"m "+ String(seconds) +"s").c_str() };
+        return { (String(minutes) + "m " + String(seconds) + "s").c_str() };
       } else {
-        return { (String(seconds) +"s").c_str() };
+        return { (String(seconds) + "s").c_str() };
       }
     icon: mdi:clock-start
 
 time:
   - platform: sntp
     id: sntp_time
-  # Define the timezone of the device
     timezone: "${timezone}"
-  # Change sync interval from default 5min to 6 hours (or as set in substitutions)
     update_interval: ${sntp_update_interval}
-  # Set specific sntp servers to use
     servers:
       - "${sntp_server_1}"
       - "${sntp_server_2}"
       - "${sntp_server_3}"
-  # Publish the time the device was last restarted
     on_time_sync:
       then:
-        # Update last restart time, but only once.
         - if:
             condition:
               lambda: 'return id(device_last_restart).state == "";'

esphome/livingroom-bulb-6.yaml

@@ -10,18 +10,6 @@ substitutions:
   sntp_server_1: "0.pool.ntp.org"
   sntp_server_2: "1.pool.ntp.org"
   sntp_server_3: "2.pool.ntp.org"
-  log_level: "WARN"
-
-globals:
-  - id: fast_boot
-    type: int
-    restore_value: yes
-    initial_value: '0'
-
-  - id: restore_mode
-    type: int
-    restore_value: yes
-    initial_value: "1"
 
 esphome:
   name: "${name}"
@@ -34,27 +22,27 @@ esphome:
     name: "${project_name}"
     version: "${project_version}"
   on_boot:
-      then:
+    then:
-        - light.turn_on: 
+      - light.turn_on: 
-            id: rgbww_light
+          id: rgbww_light
-        - delay: 100ms
+      - delay: 100ms
-        - light.turn_on:
+      - light.turn_on:
-            id: rgbww_light
+          id: rgbww_light
-            brightness: 20%
+          brightness: 20%
-        - delay: 100ms
+      - delay: 100ms
-        - light.turn_on:
+      - light.turn_on:
-            id: rgbww_light
+          id: rgbww_light
-            red: 100%
+          red: 100%
-            green: 50%
+          green: 50%
-            blue: 0%
+          blue: 0%
-            white: 100%
+          white: 100%
 
 interval:
   - interval: 15s
     then:
       - if:
           condition:
-            api.connected: # check if api connected
+            api.connected:
           else:
             - light.turn_on:
                 id: rgbww_light
@@ -68,22 +56,35 @@ preferences:
   flash_write_interval: 1min
 
 api:
+  batch_delay: 0ms
 
 ota:
   - platform: esphome
 
 wifi:
-  domain: .cloonar.smart
+  # Disable fast_connect so we do a full scan (required for hidden SSIDs)
-  fast_connect: False
+  fast_connect: True
+  domain: "${dns_domain}"
+
+  # Your hidden network
   networks: 
     - ssid: !secret wifi_ssid
       password: !secret wifi_password
-      hidden: True
       channel: 1
+      hidden: true
+
   manual_ip:
     static_ip: 10.42.100.16
     gateway: 10.42.100.1
     subnet: 255.255.255.0
+    dns1: 8.8.8.8
+    dns2: 1.1.1.1
+
+  # Fallback access point if Wi-Fi fails
+  ap:
+    ssid: "${name}_AP"
+    password: "bulb_fallback_pw"
+    ap_timeout: 2min     # after 2 min of failed join, enable AP
 
 binary_sensor:
   - platform: status
@@ -101,7 +102,7 @@ sensor:
     name: "WiFi Signal dB"
     id: wifi_signal_db
     update_interval: 60s
-    entity_category: "diagnostic"
+    entity_category: diagnostic
 
   - platform: copy
     source_id: wifi_signal_db
@@ -109,8 +110,7 @@ sensor:
     filters:
       - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
     unit_of_measurement: "Signal %"
-    entity_category: "diagnostic"
+    entity_category: diagnostic
-    device_class: ""
 
 output:
   - platform: esp8266_pwm
@@ -164,55 +164,47 @@ text_sensor:
       name: "Mac Address"
       entity_category: diagnostic
 
-  #  Creates a sensor showing when the device was last restarted
   - platform: template
     name: 'Last Restart'
     id: device_last_restart
     icon: mdi:clock
     entity_category: diagnostic
-#    device_class: timestamp
 
-  #  Creates a sensor of the uptime of the device, in formatted days, hours, minutes and seconds
   - platform: template
     name: "Uptime"
     entity_category: diagnostic
     lambda: |-
       int seconds = (id(uptime_sensor).state);
       int days = seconds / (24 * 3600);
-      seconds = seconds % (24 * 3600);
+      seconds %= (24 * 3600);
       int hours = seconds / 3600;
-      seconds = seconds % 3600;
+      seconds %= 3600;
-      int minutes = seconds /  60;
+      int minutes = seconds / 60;
-      seconds = seconds % 60;
+      seconds %= 60;
-      if ( days > 3650 ) {
+      if (days > 3650) {
         return { "Starting up" };
-      } else if ( days ) {
+      } else if (days) {
-        return { (String(days) +"d " + String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
+        return { (String(days) + "d " + String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
-      } else if ( hours ) {
+      } else if (hours) {
-        return { (String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
+        return { (String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
-      } else if ( minutes ) {
+      } else if (minutes) {
-        return { (String(minutes) +"m "+ String(seconds) +"s").c_str() };
+        return { (String(minutes) + "m " + String(seconds) + "s").c_str() };
       } else {
-        return { (String(seconds) +"s").c_str() };
+        return { (String(seconds) + "s").c_str() };
       }
     icon: mdi:clock-start
 
 time:
   - platform: sntp
     id: sntp_time
-  # Define the timezone of the device
     timezone: "${timezone}"
-  # Change sync interval from default 5min to 6 hours (or as set in substitutions)
     update_interval: ${sntp_update_interval}
-  # Set specific sntp servers to use
     servers:
       - "${sntp_server_1}"
       - "${sntp_server_2}"
       - "${sntp_server_3}"
-  # Publish the time the device was last restarted
     on_time_sync:
       then:
-        # Update last restart time, but only once.
         - if:
             condition:
               lambda: 'return id(device_last_restart).state == "";'

esphome/toilet-bulb.yaml

@@ -5,8 +5,6 @@ substitutions:
 esphome:
   name: ${device_name}
   comment: ${friendly_name}
-  platform: ESP8266
-  board: esp01_1m
   on_boot:
     then:
       - light.turn_on:
@@ -20,7 +18,8 @@ esphome:
           id: my_light
           color_temperature: 2700 K
 
-
+esp8266:
+  board: esp01_1m
           
 interval:
   - interval: 15s
@@ -40,6 +39,7 @@ interval:
 
 # Enable Home Assistant API
 api:
+  batch_delay: 0ms
 
 ota:
   platform: esphome

hosts/nb/users/codex-cli.nix

@@ -0,0 +1,49 @@
+{ config, lib, pkgs, ... }:
+let
+  user = "dominik";
+  home = "/home/${user}";
+  npmPrefix = "${home}/.npm-global";
+  node = pkgs.nodejs; # or pkgs.nodejs_20
+in {
+  home-manager.users.dominik = { lib, pkgs, ... }: {
+    home.packages = with pkgs; [
+      node
+      gnutar     # provides `tar`
+      gzip       # provides `gzip` used by tar
+      unzip  
+      python314  # useful for codex model use
+      jq         # useful for JSON processing
+    ];
+
+    # Ensure ~/.npmrc with a user prefix (no sudo needed)
+    home.file.".npmrc"= {
+      text = ''
+        prefix=${npmPrefix}
+      '';
+      force  = true;
+    };
+
+
+    # Ensure the npm bin dir is on PATH for all shells
+    home.sessionPath = [
+      "${npmPrefix}/bin"
+    ];
+
+    # Nice-to-have: visible variables in the shell
+    home.sessionVariables = {
+      NPM_CONFIG_PREFIX = npmPrefix;
+    };
+
+    # Auto-install @openai/codex if it's not already there
+    # (idempotent on each `home-manager switch`)
+    home.activation.installCodexCli = lib.hm.dag.entryAfter [ "writeBoundary" ] ''
+      export PATH=${node}/bin:${pkgs.gnutar}/bin:${pkgs.gzip}/bin:${pkgs.unzip}/bin:${pkgs.curl}/bin:$PATH
+      mkdir -p ${npmPrefix}
+      if ! command -v codex >/dev/null 2>&1; then
+        echo "Installing @openai/codex globally..."
+        # --global uses prefix from ~/.npmrc; PATH has node for postinstall
+        ${node}/bin/npm install -g @openai/codex
+      fi
+    '';
+  };
+}

hosts/nb/users/dominik.nix

@@ -147,6 +147,9 @@ let
   persistHome = "/home/dominik";
 in
 {
+  imports = [
+    ./codex-cli.nix
+  ];
 
   sops.secrets.openai_api_key = {
     owner = "dominik";