esphome/README.md

@@ -1,8 +1,6 @@
 # Installation
 OTA Update Shelly Device to tasmota:
 https://github.com/arendst/mgos-to-tasmota
-On gen 3 devices just download zip file from below and upload it over the web interface to shelly:
-https://github.com/tasmota/mgos32-to-tasmota32/releases
 In Tasmota make OTA Update to minimal:
 http://ota.tasmota.com/tasmota/release/tasmota-minimal.bin.gz
 Make ESPHome Configuration in Dashboard:

esphome/hallway-switch.yaml

@@ -1,100 +0,0 @@
-substitutions:
-  devicename: hallway-switch
-  max_power: "2000.0" # watt
-  max_temp: "80.0" # °C
-
-esphome:
-  name: ${devicename}
-
-#esp32:
-#  board: esp32-c3-devkitm-1
-#  flash_size: 8MB
-#  framework:
-#    type: esp-idf
-#  variant: esp32c3
-
-esp32:
-  board: esp32-c3-devkitm-1
-  flash_size: 8MB
-  framework:
-    type: esp-idf
-    version: recommended
-    sdkconfig_options:
-      COMPILER_OPTIMIZATION_SIZE: y
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
-
-logger:
-
-api:
-
-ota:
-  platform: esphome
-
-sensor:
-  - platform: ntc
-    sensor: temp_resistance_reading
-    name: "Temperature"
-    unit_of_measurement: "°C"
-    accuracy_decimals: 1
-    icon: "mdi:thermometer"
-    calibration:
-      b_constant: 3350
-      reference_resistance: 10kOhm
-      reference_temperature: 298.15K
-    on_value_range:
-      - above: ${max_temp}
-        then:
-          - output.turn_off: relay_output
-          - homeassistant.service:
-              service: persistent_notification.create
-              data:
-                title: Message from ${devicename}
-              data_template:
-                message: Switch turned off because temperature exceeded ${max_temp}°C
-  - platform: resistance
-    id: temp_resistance_reading
-    sensor: temp_analog_reading
-    configuration: DOWNSTREAM
-    resistor: 10kOhm
-  - platform: adc
-    id: temp_analog_reading
-    pin: GPIO3
-    attenuation: 12db
-
-output:
-  - platform: gpio
-    id: "relay_output"
-    pin: 7
-
-switch:
-  - platform: output
-    id: "relay"
-    name: "Relay"
-    output: "relay_output"
-
-binary_sensor:
-  - platform: gpio
-    name: "Switch"
-    pin: 10
-    on_press:
-      then:
-        - switch.toggle: "relay"
-    filters:
-      - delayed_on_off: 50ms
-
-  - platform: gpio
-    name: "Button"
-    pin:
-      number: 1
-      inverted: yes
-      mode:
-        input: true
-        pullup: true
-
-status_led:
-  pin:
-    number: 0
-    inverted: true

esphome/presense-bedroom.yaml

@@ -1,33 +0,0 @@
-esphome:
-  name: presense-bedroom
-  friendly_name: presense-bedroom
-
-esp32:
-  board: esp32dev
-  framework:
-    type: arduino
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-  - platform: esphome
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
-  fast_connect: True
-  domain: .cloonar.smart
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "Presense-Bedroom Fallback"
-    password: "jMTo5YkCC01q"
-
-captive_portal:
-
-bluetooth_proxy:
-    

esphome/presense-hallway.yaml

@@ -1,33 +0,0 @@
-esphome:
-  name: presense-hallway
-  friendly_name: presense-hallway
-
-esp32:
-  board: esp32dev
-  framework:
-    type: arduino
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-  - platform: esphome
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
-  fast_connect: True
-  domain: .cloonar.smart
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "Presense-Hallway Fallback"
-    password: "jMTo5YkCC01q"
-
-captive_portal:
-
-bluetooth_proxy:
-    

esphome/presense-kitchen.yaml

@@ -1,33 +0,0 @@
-esphome:
-  name: presense-kitchen
-  friendly_name: presense-kitchen
-
-esp32:
-  board: esp32dev
-  framework:
-    type: arduino
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-  - platform: esphome
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
-  fast_connect: True
-  domain: .cloonar.smart
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "Presense-Kitchen Fallback"
-    password: "jMTo5YkCC01q"
-
-captive_portal:
-
-bluetooth_proxy:
-    

esphome/presense-office.yaml

@@ -1,55 +0,0 @@
-esphome:
-  name: presense-office
-  friendly_name: presense-office
-
-esp32:
-  board: esp32dev
-  framework:
-    type: esp-idf
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-  - platform: esphome
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
-  fast_connect: True
-  domain: .cloonar.smart
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "Presense-Office Fallback Hotspot"
-    password: "jMTo5YkCC01q"
-
-captive_portal:
-
-bluetooth_proxy:
-
-external_components:
-  - source: github://koying/esphome-ble-remote@master
-    components: [ ble_client_hid ]
-
-ble_client:
-  - id: ble_client_1
-    mac_address: "90:f8:2e:f9:d7:32"  # Replace with your remote's MAC address
-
-ble_client_hid:
-  - id: ble_client_hid_1
-    ble_client_id: ble_client_1
-
-sensor:
-  - platform: ble_client_hid
-    type: last_event_value
-    name: "Last Event Value"
-    ble_client_hid_id: ble_client_hid_1
-
-text_sensor:
-  - platform: ble_client_hid
-    name: "Last Event Usage"
-    ble_client_hid_id: ble_client_hid_1

hosts/fw.cloonar.com/modules/home-assistant/ac.nix

@@ -1,15 +1,8 @@
-{ pkgs, ... }:
 {
   services.home-assistant.extraComponents = [
     "daikin"
     "enocean"
   ];
-  # services.home-assistant.customComponents = [
-  #   (pkgs.callPackage ./custom-components/scheduler.nix { })
-  # ];
-  services.home-assistant.customLovelaceModules = [
-    (pkgs.callPackage ./custom-components/lovelace-scheduler.nix { })
-  ];
 
   services.home-assistant.config = {
     sensor = [

hosts/fw.cloonar.com/modules/home-assistant/custom-components/bermuda.nix

@@ -1,18 +0,0 @@
-{ stdenv, fetchFromGitHub }:
-
-stdenv.mkDerivation rec {
-  pname = "ha-bermuda";
-  version = "0.7.2";  # Replace with the latest version
-
-  src = fetchFromGitHub {
-    owner = "agittins";
-    repo = "bermuda";
-    rev = "v${version}";
-    sha256 = "sha256-FBmZc2I9JoLAQ55yasa0i+SM0dMg2IbR3AaKgEybRu8="; # Replace with the correct SHA256 hash
-  };
-
-  installPhase = ''
-    mkdir -p $out
-    cp -r custom_components/bermuda $out/
-  '';
-}

hosts/fw.cloonar.com/modules/home-assistant/custom-components/hacs.nix

@@ -1,27 +0,0 @@
-{ lib
-, buildHomeAssistantComponent
-, fetchFromGitHub
-}:
-
-buildHomeAssistantComponent rec {
-  owner = "hacs";
-  domain = "hacs";
-  version = "2.0.1"; # Replace with the latest version
-
-  src = fetchFromGitHub {
-    owner = "hacs";
-    repo = "integration";
-    rev = version;
-    sha256 = ""; # You'll need to fill this in
-  };
-
-  propagatedBuildInputs = [
-    # Add any required dependencies here
-  ];
-
-  meta = with lib; {
-    homepage = "https://github.com/hacs/integration";
-    license = licenses.mit;
-    description = "HACS (Home Assistant Community Store)";
-  };
-}

hosts/fw.cloonar.com/modules/home-assistant/custom-components/lovelace-scheduler.nix

@@ -20,12 +20,12 @@ buildNpmPackage rec {
     runHook preInstall
 
     mkdir $out
-    cp card-mod.js $out
+    cp scheduler-card.js $out
 
     runHook postInstall
   '';
 
-  passthru.entrypoint = "card-mod.js";
+  passthru.entrypoint = "scheduler-card.js";
 
   meta = with lib; {
     description = "This is a Lovelace card for Home Assistant that can be used to create a time schedule for your smart devices. You can create new rules, modify existing rules and temporarily disable rules.";

hosts/fw.cloonar.com/modules/home-assistant/custom-components/scheduler.nix

@@ -6,7 +6,7 @@
 }:
 
 buildHomeAssistantComponent rec {
-  owner = "nielsfaber";
+  owner = "KartoffelToby";
   domain = "scheduler";
   version = "3.3.7";
 

hosts/fw.cloonar.com/modules/home-assistant/default.nix

@@ -4,7 +4,7 @@ let
   pkgs-with-home-assistant = import (builtins.fetchGit {
     name = "new-home-assistant";
     url = "https://github.com/nixos/nixpkgs/";
-    rev = "41dea55321e5a999b17033296ac05fe8a8b5a257";
+    rev = "268bb5090a3c6ac5e1615b38542a868b52ef8088";
   }) {};
 in
 {
@@ -91,7 +91,6 @@ in
         ./power-saving.nix
         ./pushover.nix
         ./presense.nix
-        ./remote.nix
         ./roborock.nix
         ./scene-switch.nix
         ./shelly.nix
@@ -150,25 +149,6 @@ in
         "tplink_omada"
       ];
 
-      systemd.services.install-hacs = {
-        description = "Install HACS";
-        wantedBy = [ "multi-user.target" ];
-        serviceConfig = {
-          Type = "oneshot";
-        };
-        script = ''
-          set -e
-          HACS_VERSION="2.0.1"  # Replace with the latest version
-          HACS_DIR="/var/lib/hass/custom_components/hacs"
-          
-          mkdir -p "$HACS_DIR"
-          ${pkgs.curl}/bin/curl -L "https://github.com/hacs/integration/releases/download/$HACS_VERSION/hacs.zip" -o /tmp/hacs.zip
-          ${pkgs.unzip}/bin/unzip -o /tmp/hacs.zip -d "$HACS_DIR"
-          rm /tmp/hacs.zip
-          chown -R hass:hass "$HACS_DIR"
-        '';
-      };
-
       services.home-assistant.extraPackages = ps: with ps; [
         mysqlclient
       ];

hosts/fw.cloonar.com/modules/home-assistant/multimedia.nix

@@ -49,7 +49,7 @@
             friendly_name = "Any multimedia device on";
             device_class = "connectivity";
             value_template = ''
-              {% if ((states('media_player.living_room') != 'off') and (states('media_player.living_room') != 'standby')) or is_state('binary_sensor.ps5', 'on') or is_state('binary_sensor.xbox', 'on') or (is_state('binary_sensor.steamdeck', 'on') and (states('sensor.steamdeck_power') | float(default=0) > 5)) %}
+              {% if (states('media_player.living_room') != 'standby' and states('media_player.living_room') != 'off') or is_state('binary_sensor.ps5', 'on') or is_state('binary_sensor.xbox', 'on') or (states('media_player.fire_tv_firetv_living_cloonar_multimedia') != 'off' and states('media_player.fire_tv_firetv_living_cloonar_multimedia') != 'unavailable') or (is_state('binary_sensor.steamdeck', 'on') and (states('sensor.steamdeck_power') | float(default=0) > 5)) %}
                  on
               {% else %}
                  off
@@ -73,12 +73,6 @@
                   }
                 ];
                 sequence = [
-                  {
-                    service = "automation.turn_off";
-                    target = {
-                      entity_id = "automation.all_multimedia_off";  # Replace with your target automation ID
-                    };
-                  }
                   {
                     service = "switch.turn_on";
                     target = {
@@ -100,24 +94,6 @@
                       command = "b64:JgBOAJaSFREVNRU2FTUVERURFRAVERURFTUVNhU1FREVERUQFREVERUQFTYVNRURFREVEBURFTYVNRURFRAVNhU1FTYVNRUABfmWkhURFQANBQAAAAAAAAAAAAA=";
                     };
                   }
-                  {
-                    delay = 10;
-                  }
-                  {
-                    service = "remote.turn_on";
-                    target = {
-                      entity_id = "remote.living_room";
-                    };
-                  }
-                  {
-                    delay = 120;
-                  }
-                  {
-                    service = "automation.turn_on";
-                    target = {
-                      entity_id = "automation.all_multimedia_off";  # Replace with your target automation ID
-                    };
-                  }
                 ];
               }
               {

hosts/fw.cloonar.com/modules/home-assistant/presense.nix

@@ -1,33 +1,9 @@
-{ pkgs, ... }:
-let
-  bermuda = pkgs.callPackage ./custom-components/bermuda.nix {};
-in
 {
   services.home-assistant.extraComponents = [
     "daikin"
     "enocean"
-    "private_ble_device"
   ];
 
-  systemd.services.install-bermuda = {
-    description = "Install Bermuda";
-    wantedBy = [ "multi-user.target" ];
-    serviceConfig = {
-      Type = "oneshot";
-    };
-    script = ''
-      set -e
-      BERMUDA_VERSION="v0.7.2"  # Replace with the latest version
-      BERMUDA_DIR="/var/lib/hass/custom_components/bermuda"
-      
-      mkdir -p "$BERMUDA_DIR"
-      ${pkgs.curl}/bin/curl -L "https://github.com/agittins/bermuda/releases/download/$BERMUDA_VERSION/bermuda.zip" -o /tmp/bermuda.zip
-      ${pkgs.unzip}/bin/unzip -o /tmp/bermuda.zip -d "$BERMUDA_DIR"
-      rm /tmp/bermuda.zip
-      chown -R hass:hass "$BERMUDA_DIR"
-    '';
-  };
-
   services.home-assistant.config = {
     "automation presense kitchen" = {
       alias = "presense kitchen";
@@ -60,6 +36,103 @@ in
       ];
     };
     sensor = [
+      {
+        platform = "mqtt_room";
+        device_id = "dominiksiphone";
+        name = "Dominiks iPhone";
+        state_topic = "espresense/devices/dominiksiphone";
+        timeout = 10;
+        away_timeout = 120;
+      }
+      {
+        platform = "template";
+        sensors = {
+          presense_devices = {
+            friendly_name = "Presense Devices";
+            value_template = "dominiks_iphone";
+          };
+        };
+      }
+      {
+        platform = "template";
+        sensors = {
+          presense_livingroom = {
+            friendly_name = "Presense Livingroom";
+            value_template = ''
+              {% set room = "livingroom" %}
+              {% set presense = namespace(list=[]) %}
+              {% set presense_list = [] %}
+              {% set device_list = states('sensor.presense_devices').split(',') %}
+              {% for device in device_list %}
+                {% if is_state('sensor.' + device, room) %}
+                  {% set presense.list = presense.list + [device] %}
+                {% endif %}
+              {% endfor %}
+              {{ presense.list | join("") }}
+            '';
+          };
+        };
+      }
+      {
+        platform = "template";
+        sensors = {
+          presense_kitchen = {
+            friendly_name = "Presense Kitchen";
+            value_template = ''
+              {% set room = "kitchen" %}
+              {% set presense = namespace(list=[]) %}
+              {% set presense_list = [] %}
+              {% set device_list = states('sensor.presense_devices').split(',') %}
+              {% for device in device_list %}
+                {% if is_state('sensor.' + device, room) %}
+                  {% set presense.list = presense.list + [device] %}
+                {% endif %}
+              {% endfor %}
+              {{ presense.list | join("") }}
+            '';
+          };
+        };
+      }
+      {
+        platform = "template";
+        sensors = {
+          presense_hallway = {
+            friendly_name = "Presense Hallway";
+            value_template = ''
+              {% set room = "hallway" %}
+              {% set presense = namespace(list=[]) %}
+              {% set presense_list = [] %}
+              {% set device_list = states('sensor.presense_devices').split(',') %}
+              {% for device in device_list %}
+                {% if is_state('sensor.' + device, room) %}
+                  {% set presense.list = presense.list + [device] %}
+                {% endif %}
+              {% endfor %}
+              {{ presense.list | join("") }}
+            '';
+          };
+        };
+      }
+      {
+        platform = "template";
+        sensors = {
+          presense_bedroom = {
+            friendly_name = "Presense Bedroom";
+            value_template = ''
+              {% set room = "bedroom" %}
+              {% set presense = namespace(list=[]) %}
+              {% set presense_list = [] %}
+              {% set device_list = states('sensor.presense_devices').split(',') %}
+              {% for device in device_list %}
+                {% if is_state('sensor.' + device, room) %}
+                  {% set presense.list = presense.list + [device] %}
+                {% endif %}
+              {% endfor %}
+              {{ presense.list | join("") }}
+            '';
+          };
+        };
+      }
     ];
   };
 }

hosts/fw.cloonar.com/modules/home-assistant/remote.nix

@@ -1,333 +0,0 @@
-let
-  remote_entity = "remote.living_room";
-  media_player_entity = "media_player.living_room";
-in {
-  services.home-assistant.config = {
-    "automation press power" = {
-      alias = "steamdeck on";
-      trigger = {
-        platform = "event";
-        event_type = "esphome.hid_events";
-        event_data = {
-          usage = "Keyboard Power";
-          value = "1";
-        };
-      };
-      action = [
-        {
-          choose = [
-            {
-              conditions = [
-                {
-                  condition = "state";
-                  entity_id = "switch.tv_switch";
-                  state = "off";
-                }
-              ];
-              sequence = [
-                {
-                  service = "script.turn_on";
-                  target = {
-                    entity_id = "script.turn_on_tv";
-                  };
-                }
-              ];
-            }
-            {
-              conditions = [
-                {
-                  condition = "template";
-                  value_template = "{{ states('media_player.living_room') != 'off' }}";
-                }
-              ];
-              sequence = [
-                {
-                  action = "remote.send_command";
-                  target = {
-                    entity_id = remote_entity;
-
-                  };
-                  data = {
-                    hold_secs = 1;
-                    command = "home";
-                  };
-                }
-              ];
-            }
-          ];
-        }
-      ];
-    };
-    "automation remote press up" = {
-      alias = "remote press up";
-      trigger = {
-        platform = "event";
-        event_type = "esphome.hid_events";
-        event_data = {
-          usage = "Keyboard UpArrow";
-          value = "1";
-        };
-      };
-      action = [
-        {
-          action = "remote.send_command";
-          target = {
-            entity_id = remote_entity;
-          };
-          data = {
-            command = "up";
-          };
-        }
-      ];
-    };
-    "automation remote press right" = {
-      alias = "remote press right";
-      trigger = {
-        platform = "event";
-        event_type = "esphome.hid_events";
-        event_data = {
-          usage = "Keyboard RightArrow";
-          value = "1";
-        };
-      };
-      action = [
-        {
-          action = "remote.send_command";
-          target = {
-            entity_id = remote_entity;
-          };
-          data = {
-            command = "right";
-          };
-        }
-      ];
-    };
-    "automation remote press down" = {
-      alias = "remote press down";
-      trigger = {
-        platform = "event";
-        event_type = "esphome.hid_events";
-        event_data = {
-          usage = "Keyboard DownArrow";
-          value = "1";
-        };
-      };
-      action = [
-        {
-          action = "remote.send_command";
-          target = {
-            entity_id = remote_entity;
-          };
-          data = {
-            command = "down";
-          };
-        }
-      ];
-    };
-    "automation remote press left" = {
-      alias = "remote press left";
-      trigger = {
-        platform = "event";
-        event_type = "esphome.hid_events";
-        event_data = {
-          usage = "Keyboard LeftArrow";
-          value = "1";
-        };
-      };
-      action = [
-        {
-          action = "remote.send_command";
-          target = {
-            entity_id = remote_entity;
-          };
-          data = {
-            command = "left";
-          };
-        }
-      ];
-    };
-    "automation remote press enter" = {
-      alias = "remote press enter";
-      trigger = {
-        platform = "event";
-        event_type = "esphome.hid_events";
-        event_data = {
-          usage = "Keypad ENTER";
-          value = "1";
-        };
-      };
-      action = [
-        {
-          action = "remote.send_command";
-          target = {
-            entity_id = remote_entity;
-          };
-          data = {
-            command = "select";
-          };
-        }
-      ];
-    };
-    "automation remote press return" = {
-      alias = "remote press return";
-      trigger = {
-        platform = "event";
-        event_type = "esphome.hid_events";
-        event_data = {
-          usage = "7_241";
-          value = "1";
-        };
-      };
-      action = [
-        {
-          action = "remote.send_command";
-          target = {
-            entity_id = remote_entity;
-          };
-          data = {
-            command = "menu";
-          };
-        }
-      ];
-    };
-    "automation remote press home" = {
-      alias = "remote press home";
-      trigger = {
-        platform = "event";
-        event_type = "esphome.hid_events";
-        event_data = {
-          usage = "AC Home";
-          value = "1";
-        };
-      };
-      action = [
-        {
-          action = "remote.send_command";
-          target = {
-            entity_id = remote_entity;
-          };
-          data = {
-            command = "home";
-          };
-        }
-      ];
-    };
-    "automation remote press Menu" = {
-      alias = "remote press menu";
-      trigger = {
-        platform = "event";
-        event_type = "esphome.hid_events";
-        event_data = {
-          usage = "Menu";
-          value = "1";
-        };
-      };
-      action = [
-        {
-          action = "remote.send_command";
-          target = {
-            entity_id = remote_entity;
-          };
-          data = {
-            hold_secs = 1;
-            command = "select";
-          };
-        }
-      ];
-    };
-    "automation remote press program guide" = {
-      alias = "remote press program guide";
-      trigger = {
-        platform = "event";
-        event_type = "esphome.hid_events";
-        event_data = {
-          usage = "Media Select Program Guide";
-          value = "1";
-        };
-      };
-      action = [
-        {
-          service = "automation.trigger";
-          target = {
-            entity_id = "automation.multimedia_scene_switch";
-          };
-        }
-      ];
-    };
-    "automation remote press 1" = {
-      alias = "remote press 1";
-      trigger = {
-        platform = "event";
-        event_type = "esphome.hid_events";
-        event_data = {
-          usage = "AC Set Clock";
-          value = "1";
-        };
-      };
-      action = [
-        {
-          service = "light.toggle";
-          target = {
-            entity_id = "light.livingroom_switch";
-          };
-        }
-      ];
-    };
-    "automation remote press 2" = {
-      alias = "remote press 2";
-      trigger = {
-        platform = "event";
-        event_type = "esphome.hid_events";
-        event_data = {
-          usage = "AC View Clock";
-          value = "1";
-        };
-      };
-      action = [
-        {
-          service = "light.toggle";
-          target = {
-            entity_id = "light.4d_f7b4";
-          };
-        }
-      ];
-    };
-    "automation remote press prime video" = {
-      alias = "remote press prime video";
-      trigger = {
-        platform = "event";
-        event_type = "esphome.hid_events";
-        event_data = {
-          usage = "161_0";
-          value = "1";
-        };
-      };
-      action = [
-        {
-          action = "media_player.select_source";
-          target.entity_id = media_player_entity;
-          data.source = "Prime Video";
-        }
-      ];
-    };
-    "automation remote press netflix" = {
-      alias = "remote press netflix";
-      trigger = {
-        platform = "event";
-        event_type = "esphome.hid_events";
-        event_data = {
-          usage = "162_0";
-          value = "1";
-        };
-      };
-      action = [
-        {
-          action = "media_player.select_source";
-          target.entity_id = media_player_entity;
-          data.source = "Netflix";
-        }
-      ];
-    };
-    
-  };
-}