feat: nb add scana11y address and change firefox config

esphome/README.md

@@ -6,4 +6,4 @@ https://github.com/tasmota/mgos32-to-tasmota32/releases
 In Tasmota make OTA Update to minimal:
 http://ota.tasmota.com/tasmota/release/tasmota-minimal.bin.gz
 Make ESPHome Configuration in Dashboard:
-docker run --rm -p 6052:6052 -e ESPHOME_DASHBOARD_USE_PING=true -v "${PWD}":/config -it ghcr.io/esphome/esphome
+docker run --rm -p 6052:6052 -e ESPHOME_DASHBOARD_USE_PING=true -v "${PWD}":/config -it ghcr.io/esphome/esphome:latest

esphome/archive/install.yaml

@@ -0,0 +1,19 @@
+substitutions:
+  device_name: "install"
+  friendly_name: "Esphome Install"
+
+esphome:
+  name: ${device_name}
+  comment: ${friendly_name}
+  platform: ESP8266
+  board: esp01_1m
+
+web_server:
+  port: 80
+
+ota:
+  platform: esphome
+
+wifi:
+  ssid: Cloonar-Smart
+  password: 0m6sY7Ue3G31

esphome/bathroom-bulb-1.yaml

@@ -5,8 +5,6 @@ substitutions:
 esphome:
   name: ${device_name}
   comment: ${friendly_name}
-  platform: ESP8266
-  board: esp01_1m
   on_boot:
     priority: 300
     then:
@@ -23,6 +21,9 @@ esphome:
           green: 50%
           blue: 0%
           white: 100%
+
+esp8266:
+  board: esp01_1m
           
 interval:
   - interval: 15s
@@ -37,6 +38,7 @@ interval:
 
 # Enable Home Assistant API
 api:
+  batch_delay: 0ms
 
 ota:
   platform: esphome

esphome/bathroom-bulb-2.yaml

@@ -5,8 +5,6 @@ substitutions:
 esphome:
   name: ${device_name}
   comment: ${friendly_name}
-  platform: ESP8266
-  board: esp01_1m
   on_boot:
     priority: 300
     then:
@@ -23,6 +21,9 @@ esphome:
           green: 50%
           blue: 0%
           white: 100%
+
+esp8266:
+  board: esp01_1m
           
 interval:
   - interval: 15s
@@ -37,6 +38,7 @@ interval:
 
 # Enable Home Assistant API
 api:
+  batch_delay: 0ms
 
 ota:
   platform: esphome

esphome/bedroom-bulb-1.yaml

@@ -5,8 +5,6 @@ substitutions:
 esphome:
   name: ${device_name}
   comment: ${friendly_name}
-  platform: ESP8266
-  board: esp01_1m
   on_boot:
     priority: 300
     then:
@@ -23,6 +21,9 @@ esphome:
           green: 50%
           blue: 0%
           white: 100%
+
+esp8266:
+  board: esp01_1m
           
 interval:
   - interval: 15s
@@ -37,6 +38,7 @@ interval:
 
 # Enable Home Assistant API
 api:
+  batch_delay: 0ms
 
 ota:
   platform: esphome

esphome/bedroom-bulb-2.yaml

@@ -5,8 +5,6 @@ substitutions:
 esphome:
   name: ${device_name}
   comment: ${friendly_name}
-  platform: ESP8266
-  board: esp01_1m
   on_boot:
     priority: 300
     then:
@@ -23,6 +21,9 @@ esphome:
           green: 50%
           blue: 0%
           white: 100%
+
+esp8266:
+  board: esp01_1m
           
 interval:
   - interval: 15s
@@ -37,6 +38,7 @@ interval:
 
 # Enable Home Assistant API
 api:
+  batch_delay: 0ms
 
 ota:
   platform: esphome

esphome/bedroom-bulb-3.yaml

@@ -5,8 +5,6 @@ substitutions:
 esphome:
   name: ${device_name}
   comment: ${friendly_name}
-  platform: ESP8266
-  board: esp01_1m
   on_boot:
     priority: 300
     then:
@@ -23,6 +21,9 @@ esphome:
           green: 50%
           blue: 0%
           white: 100%
+
+esp8266:
+  board: esp01_1m
           
 interval:
   - interval: 15s
@@ -37,6 +38,7 @@ interval:
 
 # Enable Home Assistant API
 api:
+  batch_delay: 0ms
 
 ota:
   platform: esphome

esphome/bedroom-bulb-4.yaml

@@ -5,8 +5,6 @@ substitutions:
 esphome:
   name: ${device_name}
   comment: ${friendly_name}
-  platform: ESP8266
-  board: esp01_1m
   on_boot:
     priority: 300
     then:
@@ -23,6 +21,9 @@ esphome:
           green: 50%
           blue: 0%
           white: 100%
+
+esp8266:
+  board: esp01_1m
           
 interval:
   - interval: 15s
@@ -37,6 +38,7 @@ interval:
 
 # Enable Home Assistant API
 api:
+  batch_delay: 0ms
 
 ota:
   platform: esphome

esphome/hallway-bulb-1.yaml

@@ -5,8 +5,6 @@ substitutions:
 esphome:
   name: ${device_name}
   comment: ${friendly_name}
-  platform: ESP8266
-  board: esp01_1m
   on_boot:
     priority: 300
     then:
@@ -23,6 +21,9 @@ esphome:
           green: 50%
           blue: 0%
           white: 100%
+
+esp8266:
+  board: esp01_1m
           
 interval:
   - interval: 15s
@@ -37,6 +38,7 @@ interval:
 
 # Enable Home Assistant API
 api:
+  batch_delay: 0ms
 
 ota:
   platform: esphome

esphome/hallway-bulb-2.yaml

@@ -5,8 +5,6 @@ substitutions:
 esphome:
   name: ${device_name}
   comment: ${friendly_name}
-  platform: ESP8266
-  board: esp01_1m
   on_boot:
     priority: 300
     then:
@@ -23,6 +21,9 @@ esphome:
           green: 50%
           blue: 0%
           white: 100%
+
+esp8266:
+  board: esp01_1m
           
 interval:
   - interval: 15s
@@ -37,6 +38,7 @@ interval:
 
 # Enable Home Assistant API
 api:
+  batch_delay: 0ms
 
 ota:
   platform: esphome

esphome/livingroom-bulb-1.yaml

@@ -56,13 +56,14 @@ preferences:
   flash_write_interval: 1min
 
 api:
+  batch_delay: 0ms
 
 ota:
   - platform: esphome
 
 wifi:
   # Disable fast_connect so we do a full scan (required for hidden SSIDs)
-  fast_connect: false
+  fast_connect: True
   domain: "${dns_domain}"
 
   # Your hidden network
@@ -84,7 +85,6 @@ wifi:
     ssid: "${name}_AP"
     password: "bulb_fallback_pw"
     ap_timeout: 2min     # after 2 min of failed join, enable AP
-  reboot_timeout: 5min  # if still not joined after 5 min, reboot and retry
 
 binary_sensor:
   - platform: status

esphome/livingroom-bulb-2.yaml

@@ -10,7 +10,6 @@ substitutions:
   sntp_server_1: "0.pool.ntp.org"
   sntp_server_2: "1.pool.ntp.org"
   sntp_server_3: "2.pool.ntp.org"
-  log_level: "WARN"
 
 esphome:
   name: "${name}"
@@ -23,27 +22,27 @@ esphome:
     name: "${project_name}"
     version: "${project_version}"
   on_boot:
-      then:
-        - light.turn_on: 
-            id: rgbww_light
-        - delay: 100ms
-        - light.turn_on:
-            id: rgbww_light
-            brightness: 20%
-        - delay: 100ms
-        - light.turn_on:
-            id: rgbww_light
-            red: 100%
-            green: 50%
-            blue: 0%
-            white: 100%
+    then:
+      - light.turn_on: 
+          id: rgbww_light
+      - delay: 100ms
+      - light.turn_on:
+          id: rgbww_light
+          brightness: 20%
+      - delay: 100ms
+      - light.turn_on:
+          id: rgbww_light
+          red: 100%
+          green: 50%
+          blue: 0%
+          white: 100%
 
 interval:
   - interval: 15s
     then:
       - if:
           condition:
-            api.connected: # check if api connected
+            api.connected:
           else:
             - light.turn_on:
                 id: rgbww_light
@@ -57,22 +56,35 @@ preferences:
   flash_write_interval: 1min
 
 api:
+  batch_delay: 0ms
 
 ota:
   - platform: esphome
 
 wifi:
-  domain: .cloonar.smart
-  fast_connect: False
+  # Disable fast_connect so we do a full scan (required for hidden SSIDs)
+  fast_connect: True
+  domain: "${dns_domain}"
+
+  # Your hidden network
   networks: 
     - ssid: !secret wifi_ssid
       password: !secret wifi_password
       channel: 1
-      hidden: True
+      hidden: true
+
   manual_ip:
     static_ip: 10.42.100.12
     gateway: 10.42.100.1
     subnet: 255.255.255.0
+    dns1: 8.8.8.8
+    dns2: 1.1.1.1
+
+  # Fallback access point if Wi-Fi fails
+  ap:
+    ssid: "${name}_AP"
+    password: "bulb_fallback_pw"
+    ap_timeout: 2min     # after 2 min of failed join, enable AP
 
 binary_sensor:
   - platform: status
@@ -90,7 +102,7 @@ sensor:
     name: "WiFi Signal dB"
     id: wifi_signal_db
     update_interval: 60s
-    entity_category: "diagnostic"
+    entity_category: diagnostic
 
   - platform: copy
     source_id: wifi_signal_db
@@ -98,8 +110,7 @@ sensor:
     filters:
       - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
     unit_of_measurement: "Signal %"
-    entity_category: "diagnostic"
-    device_class: ""
+    entity_category: diagnostic
 
 output:
   - platform: esp8266_pwm
@@ -153,59 +164,51 @@ text_sensor:
       name: "Mac Address"
       entity_category: diagnostic
 
-  #  Creates a sensor showing when the device was last restarted
   - platform: template
     name: 'Last Restart'
     id: device_last_restart
     icon: mdi:clock
     entity_category: diagnostic
-#    device_class: timestamp
 
-  #  Creates a sensor of the uptime of the device, in formatted days, hours, minutes and seconds
   - platform: template
     name: "Uptime"
     entity_category: diagnostic
     lambda: |-
       int seconds = (id(uptime_sensor).state);
       int days = seconds / (24 * 3600);
-      seconds = seconds % (24 * 3600);
+      seconds %= (24 * 3600);
       int hours = seconds / 3600;
-      seconds = seconds % 3600;
-      int minutes = seconds /  60;
-      seconds = seconds % 60;
-      if ( days > 3650 ) {
+      seconds %= 3600;
+      int minutes = seconds / 60;
+      seconds %= 60;
+      if (days > 3650) {
         return { "Starting up" };
-      } else if ( days ) {
-        return { (String(days) +"d " + String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
-      } else if ( hours ) {
-        return { (String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
-      } else if ( minutes ) {
-        return { (String(minutes) +"m "+ String(seconds) +"s").c_str() };
+      } else if (days) {
+        return { (String(days) + "d " + String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
+      } else if (hours) {
+        return { (String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
+      } else if (minutes) {
+        return { (String(minutes) + "m " + String(seconds) + "s").c_str() };
       } else {
-        return { (String(seconds) +"s").c_str() };
+        return { (String(seconds) + "s").c_str() };
       }
     icon: mdi:clock-start
 
 time:
   - platform: sntp
     id: sntp_time
-  # Define the timezone of the device
     timezone: "${timezone}"
-  # Change sync interval from default 5min to 6 hours (or as set in substitutions)
     update_interval: ${sntp_update_interval}
-  # Set specific sntp servers to use
     servers:
       - "${sntp_server_1}"
       - "${sntp_server_2}"
       - "${sntp_server_3}"
-  # Publish the time the device was last restarted
     on_time_sync:
       then:
-        # Update last restart time, but only once.
         - if:
             condition:
               lambda: 'return id(device_last_restart).state == "";'
             then:
               - text_sensor.template.publish:
                   id: device_last_restart
-                  state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'
+                  state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'

esphome/livingroom-bulb-3.yaml

@@ -10,18 +10,6 @@ substitutions:
   sntp_server_1: "0.pool.ntp.org"
   sntp_server_2: "1.pool.ntp.org"
   sntp_server_3: "2.pool.ntp.org"
-  log_level: "WARN"
-
-globals:
-  - id: fast_boot
-    type: int
-    restore_value: yes
-    initial_value: '0'
-
-  - id: restore_mode
-    type: int
-    restore_value: yes
-    initial_value: "1"
 
 esphome:
   name: "${name}"
@@ -34,27 +22,27 @@ esphome:
     name: "${project_name}"
     version: "${project_version}"
   on_boot:
-      then:
-        - light.turn_on: 
-            id: rgbww_light
-        - delay: 100ms
-        - light.turn_on:
-            id: rgbww_light
-            brightness: 20%
-        - delay: 100ms
-        - light.turn_on:
-            id: rgbww_light
-            red: 100%
-            green: 50%
-            blue: 0%
-            white: 100%
+    then:
+      - light.turn_on: 
+          id: rgbww_light
+      - delay: 100ms
+      - light.turn_on:
+          id: rgbww_light
+          brightness: 20%
+      - delay: 100ms
+      - light.turn_on:
+          id: rgbww_light
+          red: 100%
+          green: 50%
+          blue: 0%
+          white: 100%
 
 interval:
   - interval: 15s
     then:
       - if:
           condition:
-            api.connected: # check if api connected
+            api.connected:
           else:
             - light.turn_on:
                 id: rgbww_light
@@ -68,22 +56,35 @@ preferences:
   flash_write_interval: 1min
 
 api:
+  batch_delay: 0ms
 
 ota:
   - platform: esphome
 
 wifi:
-  domain: .cloonar.smart
-  fast_connect: False
+  # Disable fast_connect so we do a full scan (required for hidden SSIDs)
+  fast_connect: True
+  domain: "${dns_domain}"
+
+  # Your hidden network
   networks: 
     - ssid: !secret wifi_ssid
       password: !secret wifi_password
-      hidden: True
       channel: 1
+      hidden: true
+
   manual_ip:
     static_ip: 10.42.100.13
     gateway: 10.42.100.1
     subnet: 255.255.255.0
+    dns1: 8.8.8.8
+    dns2: 1.1.1.1
+
+  # Fallback access point if Wi-Fi fails
+  ap:
+    ssid: "${name}_AP"
+    password: "bulb_fallback_pw"
+    ap_timeout: 2min     # after 2 min of failed join, enable AP
 
 binary_sensor:
   - platform: status
@@ -101,7 +102,7 @@ sensor:
     name: "WiFi Signal dB"
     id: wifi_signal_db
     update_interval: 60s
-    entity_category: "diagnostic"
+    entity_category: diagnostic
 
   - platform: copy
     source_id: wifi_signal_db
@@ -109,8 +110,7 @@ sensor:
     filters:
       - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
     unit_of_measurement: "Signal %"
-    entity_category: "diagnostic"
-    device_class: ""
+    entity_category: diagnostic
 
 output:
   - platform: esp8266_pwm
@@ -164,59 +164,51 @@ text_sensor:
       name: "Mac Address"
       entity_category: diagnostic
 
-  #  Creates a sensor showing when the device was last restarted
   - platform: template
     name: 'Last Restart'
     id: device_last_restart
     icon: mdi:clock
     entity_category: diagnostic
-#    device_class: timestamp
 
-  #  Creates a sensor of the uptime of the device, in formatted days, hours, minutes and seconds
   - platform: template
     name: "Uptime"
     entity_category: diagnostic
     lambda: |-
       int seconds = (id(uptime_sensor).state);
       int days = seconds / (24 * 3600);
-      seconds = seconds % (24 * 3600);
+      seconds %= (24 * 3600);
       int hours = seconds / 3600;
-      seconds = seconds % 3600;
-      int minutes = seconds /  60;
-      seconds = seconds % 60;
-      if ( days > 3650 ) {
+      seconds %= 3600;
+      int minutes = seconds / 60;
+      seconds %= 60;
+      if (days > 3650) {
         return { "Starting up" };
-      } else if ( days ) {
-        return { (String(days) +"d " + String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
-      } else if ( hours ) {
-        return { (String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
-      } else if ( minutes ) {
-        return { (String(minutes) +"m "+ String(seconds) +"s").c_str() };
+      } else if (days) {
+        return { (String(days) + "d " + String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
+      } else if (hours) {
+        return { (String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
+      } else if (minutes) {
+        return { (String(minutes) + "m " + String(seconds) + "s").c_str() };
       } else {
-        return { (String(seconds) +"s").c_str() };
+        return { (String(seconds) + "s").c_str() };
       }
     icon: mdi:clock-start
 
 time:
   - platform: sntp
     id: sntp_time
-  # Define the timezone of the device
     timezone: "${timezone}"
-  # Change sync interval from default 5min to 6 hours (or as set in substitutions)
     update_interval: ${sntp_update_interval}
-  # Set specific sntp servers to use
     servers:
       - "${sntp_server_1}"
       - "${sntp_server_2}"
       - "${sntp_server_3}"
-  # Publish the time the device was last restarted
     on_time_sync:
       then:
-        # Update last restart time, but only once.
         - if:
             condition:
               lambda: 'return id(device_last_restart).state == "";'
             then:
               - text_sensor.template.publish:
                   id: device_last_restart
-                  state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'
+                  state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'

esphome/livingroom-bulb-4.yaml

@@ -10,18 +10,6 @@ substitutions:
   sntp_server_1: "0.pool.ntp.org"
   sntp_server_2: "1.pool.ntp.org"
   sntp_server_3: "2.pool.ntp.org"
-  log_level: "WARN"
-
-globals:
-  - id: fast_boot
-    type: int
-    restore_value: yes
-    initial_value: '0'
-
-  - id: restore_mode
-    type: int
-    restore_value: yes
-    initial_value: "1"
 
 esphome:
   name: "${name}"
@@ -34,27 +22,27 @@ esphome:
     name: "${project_name}"
     version: "${project_version}"
   on_boot:
-      then:
-        - light.turn_on: 
-            id: rgbww_light
-        - delay: 100ms
-        - light.turn_on:
-            id: rgbww_light
-            brightness: 20%
-        - delay: 100ms
-        - light.turn_on:
-            id: rgbww_light
-            red: 100%
-            green: 50%
-            blue: 0%
-            white: 100%
+    then:
+      - light.turn_on: 
+          id: rgbww_light
+      - delay: 100ms
+      - light.turn_on:
+          id: rgbww_light
+          brightness: 20%
+      - delay: 100ms
+      - light.turn_on:
+          id: rgbww_light
+          red: 100%
+          green: 50%
+          blue: 0%
+          white: 100%
 
 interval:
   - interval: 15s
     then:
       - if:
           condition:
-            api.connected: # check if api connected
+            api.connected:
           else:
             - light.turn_on:
                 id: rgbww_light
@@ -68,21 +56,35 @@ preferences:
   flash_write_interval: 1min
 
 api:
+  batch_delay: 0ms
 
 ota:
   - platform: esphome
 
 wifi:
-  domain: .cloonar.smart
-  fast_connect: False
+  # Disable fast_connect so we do a full scan (required for hidden SSIDs)
+  fast_connect: True
+  domain: "${dns_domain}"
+
+  # Your hidden network
   networks: 
     - ssid: !secret wifi_ssid
       password: !secret wifi_password
-      hidden: True
+      channel: 1
+      hidden: true
+
   manual_ip:
     static_ip: 10.42.100.14
     gateway: 10.42.100.1
     subnet: 255.255.255.0
+    dns1: 8.8.8.8
+    dns2: 1.1.1.1
+
+  # Fallback access point if Wi-Fi fails
+  ap:
+    ssid: "${name}_AP"
+    password: "bulb_fallback_pw"
+    ap_timeout: 2min     # after 2 min of failed join, enable AP
 
 binary_sensor:
   - platform: status
@@ -100,7 +102,7 @@ sensor:
     name: "WiFi Signal dB"
     id: wifi_signal_db
     update_interval: 60s
-    entity_category: "diagnostic"
+    entity_category: diagnostic
 
   - platform: copy
     source_id: wifi_signal_db
@@ -108,8 +110,7 @@ sensor:
     filters:
       - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
     unit_of_measurement: "Signal %"
-    entity_category: "diagnostic"
-    device_class: ""
+    entity_category: diagnostic
 
 output:
   - platform: esp8266_pwm
@@ -163,59 +164,51 @@ text_sensor:
       name: "Mac Address"
       entity_category: diagnostic
 
-  #  Creates a sensor showing when the device was last restarted
   - platform: template
     name: 'Last Restart'
     id: device_last_restart
     icon: mdi:clock
     entity_category: diagnostic
-#    device_class: timestamp
 
-  #  Creates a sensor of the uptime of the device, in formatted days, hours, minutes and seconds
   - platform: template
     name: "Uptime"
     entity_category: diagnostic
     lambda: |-
       int seconds = (id(uptime_sensor).state);
       int days = seconds / (24 * 3600);
-      seconds = seconds % (24 * 3600);
+      seconds %= (24 * 3600);
       int hours = seconds / 3600;
-      seconds = seconds % 3600;
-      int minutes = seconds /  60;
-      seconds = seconds % 60;
-      if ( days > 3650 ) {
+      seconds %= 3600;
+      int minutes = seconds / 60;
+      seconds %= 60;
+      if (days > 3650) {
         return { "Starting up" };
-      } else if ( days ) {
-        return { (String(days) +"d " + String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
-      } else if ( hours ) {
-        return { (String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
-      } else if ( minutes ) {
-        return { (String(minutes) +"m "+ String(seconds) +"s").c_str() };
+      } else if (days) {
+        return { (String(days) + "d " + String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
+      } else if (hours) {
+        return { (String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
+      } else if (minutes) {
+        return { (String(minutes) + "m " + String(seconds) + "s").c_str() };
       } else {
-        return { (String(seconds) +"s").c_str() };
+        return { (String(seconds) + "s").c_str() };
       }
     icon: mdi:clock-start
 
 time:
   - platform: sntp
     id: sntp_time
-  # Define the timezone of the device
     timezone: "${timezone}"
-  # Change sync interval from default 5min to 6 hours (or as set in substitutions)
     update_interval: ${sntp_update_interval}
-  # Set specific sntp servers to use
     servers:
       - "${sntp_server_1}"
       - "${sntp_server_2}"
       - "${sntp_server_3}"
-  # Publish the time the device was last restarted
     on_time_sync:
       then:
-        # Update last restart time, but only once.
         - if:
             condition:
               lambda: 'return id(device_last_restart).state == "";'
             then:
               - text_sensor.template.publish:
                   id: device_last_restart
-                  state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'
+                  state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'

esphome/livingroom-bulb-5.yaml

@@ -10,18 +10,6 @@ substitutions:
   sntp_server_1: "0.pool.ntp.org"
   sntp_server_2: "1.pool.ntp.org"
   sntp_server_3: "2.pool.ntp.org"
-  log_level: "WARN"
-
-globals:
-  - id: fast_boot
-    type: int
-    restore_value: yes
-    initial_value: '0'
-
-  - id: restore_mode
-    type: int
-    restore_value: yes
-    initial_value: "1"
 
 esphome:
   name: "${name}"
@@ -34,27 +22,27 @@ esphome:
     name: "${project_name}"
     version: "${project_version}"
   on_boot:
-      then:
-        - light.turn_on: 
-            id: rgbww_light
-        - delay: 100ms
-        - light.turn_on:
-            id: rgbww_light
-            brightness: 20%
-        - delay: 100ms
-        - light.turn_on:
-            id: rgbww_light
-            red: 100%
-            green: 50%
-            blue: 0%
-            white: 100%
+    then:
+      - light.turn_on: 
+          id: rgbww_light
+      - delay: 100ms
+      - light.turn_on:
+          id: rgbww_light
+          brightness: 20%
+      - delay: 100ms
+      - light.turn_on:
+          id: rgbww_light
+          red: 100%
+          green: 50%
+          blue: 0%
+          white: 100%
 
 interval:
   - interval: 15s
     then:
       - if:
           condition:
-            api.connected: # check if api connected
+            api.connected:
           else:
             - light.turn_on:
                 id: rgbww_light
@@ -68,21 +56,35 @@ preferences:
   flash_write_interval: 1min
 
 api:
+  batch_delay: 0ms
 
 ota:
   - platform: esphome
 
 wifi:
-  domain: .cloonar.smart
-  fast_connect: False
+  # Disable fast_connect so we do a full scan (required for hidden SSIDs)
+  fast_connect: True
+  domain: "${dns_domain}"
+
+  # Your hidden network
   networks: 
     - ssid: !secret wifi_ssid
       password: !secret wifi_password
-      hidden: True
+      channel: 1
+      hidden: true
+
   manual_ip:
     static_ip: 10.42.100.15
     gateway: 10.42.100.1
     subnet: 255.255.255.0
+    dns1: 8.8.8.8
+    dns2: 1.1.1.1
+
+  # Fallback access point if Wi-Fi fails
+  ap:
+    ssid: "${name}_AP"
+    password: "bulb_fallback_pw"
+    ap_timeout: 2min     # after 2 min of failed join, enable AP
 
 binary_sensor:
   - platform: status
@@ -100,7 +102,7 @@ sensor:
     name: "WiFi Signal dB"
     id: wifi_signal_db
     update_interval: 60s
-    entity_category: "diagnostic"
+    entity_category: diagnostic
 
   - platform: copy
     source_id: wifi_signal_db
@@ -108,8 +110,7 @@ sensor:
     filters:
       - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
     unit_of_measurement: "Signal %"
-    entity_category: "diagnostic"
-    device_class: ""
+    entity_category: diagnostic
 
 output:
   - platform: esp8266_pwm
@@ -163,59 +164,51 @@ text_sensor:
       name: "Mac Address"
       entity_category: diagnostic
 
-  #  Creates a sensor showing when the device was last restarted
   - platform: template
     name: 'Last Restart'
     id: device_last_restart
     icon: mdi:clock
     entity_category: diagnostic
-#    device_class: timestamp
 
-  #  Creates a sensor of the uptime of the device, in formatted days, hours, minutes and seconds
   - platform: template
     name: "Uptime"
     entity_category: diagnostic
     lambda: |-
       int seconds = (id(uptime_sensor).state);
       int days = seconds / (24 * 3600);
-      seconds = seconds % (24 * 3600);
+      seconds %= (24 * 3600);
       int hours = seconds / 3600;
-      seconds = seconds % 3600;
-      int minutes = seconds /  60;
-      seconds = seconds % 60;
-      if ( days > 3650 ) {
+      seconds %= 3600;
+      int minutes = seconds / 60;
+      seconds %= 60;
+      if (days > 3650) {
         return { "Starting up" };
-      } else if ( days ) {
-        return { (String(days) +"d " + String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
-      } else if ( hours ) {
-        return { (String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
-      } else if ( minutes ) {
-        return { (String(minutes) +"m "+ String(seconds) +"s").c_str() };
+      } else if (days) {
+        return { (String(days) + "d " + String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
+      } else if (hours) {
+        return { (String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
+      } else if (minutes) {
+        return { (String(minutes) + "m " + String(seconds) + "s").c_str() };
       } else {
-        return { (String(seconds) +"s").c_str() };
+        return { (String(seconds) + "s").c_str() };
       }
     icon: mdi:clock-start
 
 time:
   - platform: sntp
     id: sntp_time
-  # Define the timezone of the device
     timezone: "${timezone}"
-  # Change sync interval from default 5min to 6 hours (or as set in substitutions)
     update_interval: ${sntp_update_interval}
-  # Set specific sntp servers to use
     servers:
       - "${sntp_server_1}"
       - "${sntp_server_2}"
       - "${sntp_server_3}"
-  # Publish the time the device was last restarted
     on_time_sync:
       then:
-        # Update last restart time, but only once.
         - if:
             condition:
               lambda: 'return id(device_last_restart).state == "";'
             then:
               - text_sensor.template.publish:
                   id: device_last_restart
-                  state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'
+                  state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'

esphome/livingroom-bulb-6.yaml

@@ -10,18 +10,6 @@ substitutions:
   sntp_server_1: "0.pool.ntp.org"
   sntp_server_2: "1.pool.ntp.org"
   sntp_server_3: "2.pool.ntp.org"
-  log_level: "WARN"
-
-globals:
-  - id: fast_boot
-    type: int
-    restore_value: yes
-    initial_value: '0'
-
-  - id: restore_mode
-    type: int
-    restore_value: yes
-    initial_value: "1"
 
 esphome:
   name: "${name}"
@@ -34,27 +22,27 @@ esphome:
     name: "${project_name}"
     version: "${project_version}"
   on_boot:
-      then:
-        - light.turn_on: 
-            id: rgbww_light
-        - delay: 100ms
-        - light.turn_on:
-            id: rgbww_light
-            brightness: 20%
-        - delay: 100ms
-        - light.turn_on:
-            id: rgbww_light
-            red: 100%
-            green: 50%
-            blue: 0%
-            white: 100%
+    then:
+      - light.turn_on: 
+          id: rgbww_light
+      - delay: 100ms
+      - light.turn_on:
+          id: rgbww_light
+          brightness: 20%
+      - delay: 100ms
+      - light.turn_on:
+          id: rgbww_light
+          red: 100%
+          green: 50%
+          blue: 0%
+          white: 100%
 
 interval:
   - interval: 15s
     then:
       - if:
           condition:
-            api.connected: # check if api connected
+            api.connected:
           else:
             - light.turn_on:
                 id: rgbww_light
@@ -68,22 +56,35 @@ preferences:
   flash_write_interval: 1min
 
 api:
+  batch_delay: 0ms
 
 ota:
   - platform: esphome
 
 wifi:
-  domain: .cloonar.smart
-  fast_connect: False
+  # Disable fast_connect so we do a full scan (required for hidden SSIDs)
+  fast_connect: True
+  domain: "${dns_domain}"
+
+  # Your hidden network
   networks: 
     - ssid: !secret wifi_ssid
       password: !secret wifi_password
-      hidden: True
       channel: 1
+      hidden: true
+
   manual_ip:
     static_ip: 10.42.100.16
     gateway: 10.42.100.1
     subnet: 255.255.255.0
+    dns1: 8.8.8.8
+    dns2: 1.1.1.1
+
+  # Fallback access point if Wi-Fi fails
+  ap:
+    ssid: "${name}_AP"
+    password: "bulb_fallback_pw"
+    ap_timeout: 2min     # after 2 min of failed join, enable AP
 
 binary_sensor:
   - platform: status
@@ -101,7 +102,7 @@ sensor:
     name: "WiFi Signal dB"
     id: wifi_signal_db
     update_interval: 60s
-    entity_category: "diagnostic"
+    entity_category: diagnostic
 
   - platform: copy
     source_id: wifi_signal_db
@@ -109,8 +110,7 @@ sensor:
     filters:
       - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
     unit_of_measurement: "Signal %"
-    entity_category: "diagnostic"
-    device_class: ""
+    entity_category: diagnostic
 
 output:
   - platform: esp8266_pwm
@@ -164,59 +164,51 @@ text_sensor:
       name: "Mac Address"
       entity_category: diagnostic
 
-  #  Creates a sensor showing when the device was last restarted
   - platform: template
     name: 'Last Restart'
     id: device_last_restart
     icon: mdi:clock
     entity_category: diagnostic
-#    device_class: timestamp
 
-  #  Creates a sensor of the uptime of the device, in formatted days, hours, minutes and seconds
   - platform: template
     name: "Uptime"
     entity_category: diagnostic
     lambda: |-
       int seconds = (id(uptime_sensor).state);
       int days = seconds / (24 * 3600);
-      seconds = seconds % (24 * 3600);
+      seconds %= (24 * 3600);
       int hours = seconds / 3600;
-      seconds = seconds % 3600;
-      int minutes = seconds /  60;
-      seconds = seconds % 60;
-      if ( days > 3650 ) {
+      seconds %= 3600;
+      int minutes = seconds / 60;
+      seconds %= 60;
+      if (days > 3650) {
         return { "Starting up" };
-      } else if ( days ) {
-        return { (String(days) +"d " + String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
-      } else if ( hours ) {
-        return { (String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
-      } else if ( minutes ) {
-        return { (String(minutes) +"m "+ String(seconds) +"s").c_str() };
+      } else if (days) {
+        return { (String(days) + "d " + String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
+      } else if (hours) {
+        return { (String(hours) + "h " + String(minutes) + "m " + String(seconds) + "s").c_str() };
+      } else if (minutes) {
+        return { (String(minutes) + "m " + String(seconds) + "s").c_str() };
       } else {
-        return { (String(seconds) +"s").c_str() };
+        return { (String(seconds) + "s").c_str() };
       }
     icon: mdi:clock-start
 
 time:
   - platform: sntp
     id: sntp_time
-  # Define the timezone of the device
     timezone: "${timezone}"
-  # Change sync interval from default 5min to 6 hours (or as set in substitutions)
     update_interval: ${sntp_update_interval}
-  # Set specific sntp servers to use
     servers:
       - "${sntp_server_1}"
       - "${sntp_server_2}"
       - "${sntp_server_3}"
-  # Publish the time the device was last restarted
     on_time_sync:
       then:
-        # Update last restart time, but only once.
         - if:
             condition:
               lambda: 'return id(device_last_restart).state == "";'
             then:
               - text_sensor.template.publish:
                   id: device_last_restart
-                  state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'
+                  state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'

esphome/toilet-bulb.yaml

@@ -5,8 +5,6 @@ substitutions:
 esphome:
   name: ${device_name}
   comment: ${friendly_name}
-  platform: ESP8266
-  board: esp01_1m
   on_boot:
     then:
       - light.turn_on:
@@ -20,7 +18,8 @@ esphome:
           id: my_light
           color_temperature: 2700 K
 
-
+esp8266:
+  board: esp01_1m
           
 interval:
   - interval: 15s
@@ -40,6 +39,7 @@ interval:
 
 # Enable Home Assistant API
 api:
+  batch_delay: 0ms
 
 ota:
   platform: esphome

hosts/nb/modules/desktop/default.nix

@@ -37,10 +37,6 @@ in {
       variants = ["qt5"];
     })
 
-    vscode
-    code-cursor
-
-
     dracula-theme
     foot
     fractal

hosts/nb/modules/development/coding.nix

@@ -1,10 +1,12 @@
 { config, pkgs, ... }:
 let
-  # unstable = import (fetchTarball https://nixos.org/channels/nixos-unstable/nixexprs.tar.xz) {
-  #   config = { allowUnfree = true; };
-  # };
+  unstable = import (fetchTarball https://nixos.org/channels/nixos-unstable/nixexprs.tar.xz) {
+    config = { allowUnfree = true; };
+  };
 in {
   environment.systemPackages = with pkgs; [
-    claude-code
+    unstable.claude-code
+    unstable.code-cursor
+    unstable.vscode
   ];
 }

hosts/nb/modules/development/default.nix

@@ -10,6 +10,7 @@ in {
   imports = [
     # ./mcp.nix
     ./coding.nix
+    ./android.nix
     ./nvim/default.nix
   ];
   environment.systemPackages = with pkgs; [
@@ -37,6 +38,7 @@ in {
     vim
     wget
     wireguard-tools
+    wkhtmltopdf
     wol
   ];
 

hosts/nb/modules/sway/sway.conf

@@ -70,7 +70,7 @@ bindsym $mod+d exec foot -a launcher -e env TERMINAL_COMMAND="foot -c /etc/xdg/f
 #bindsym $mod+d exec --no-startup-id bemenu --dmenu="dmenu -i -fn 'Source Sans Pro-10' -nb '#212121' -sb '#2b83a6' -sf '#ffffff'
 
 # start an explorer
-bindsym $mod+e exec --no-startup-id thunar
+bindsym $mod+e exec --no-startup-id nautilus
 
 # switching window with win+tab
 bindsym $mod+Tab exec --no-startup-id wofi  -show window
@@ -260,7 +260,7 @@ assign [app_id="foot" title="^(?!terminal-sway)$"]   → $ws2
 assign [app_id="chromium"]            → $ws3
 assign [app_id="firefox"]             → $ws3
 assign [app_id="librewolf"]            → $ws3
-assign [app_id="pcmanfm"]             → $ws4
+assign [app_id="nautilus"]             → $ws4
 assign [app_id="libreoffice-calc"]    → $ws5
 assign [app_id="libreoffice-writer"]  → $ws5
 assign [class="vlc"]                  → $ws6
@@ -310,6 +310,9 @@ exec dunst
 exec 'sleep 2; swaymsg workspace "$ws8"; swaymsg layout tabbed'
 exec mako --default-timeout=5000
 
+# Battery low warning every minute
+exec_always sh -c 'while :; do battery-alert-swaynag; sleep 60; done' &
+
 # wallpaper
 # output eDP-1 scale 2 scale_filter linear
 output eDP-1 mode 2880x1920 scale 2 scale_filter linear

hosts/nb/modules/sway/sway.nix

@@ -17,6 +17,44 @@ let
     '';
   };
 
+  battery-alert-swaynag = pkgs.writeShellScriptBin "battery-alert-swaynag" ''
+    #!/usr/bin/env bash
+    set -euo pipefail
+
+    # Detect a battery
+    cap_file=""
+    status_file=""
+    for d in /sys/class/power_supply/BAT*; do
+      if [[ -f "$d/capacity" ]]; then
+        cap_file="$d/capacity"
+        status_file="$d/status"
+        break
+      fi
+    done
+
+    if [[ -z "$cap_file" ]]; then
+      exit 0
+    fi
+
+    capacity=$(cat "$cap_file")
+    status=$(cat "$status_file" 2>/dev/null || echo "Unknown")
+
+    if [[ "$capacity" -lt 20 && "$status" != "Charging" && "$status" != "Full" ]]; then
+      stamp="/run/user/$(id -u)/.battery_swaynag_stamp"
+      now=$(date +%s)
+      last=0
+      if [[ -f "$stamp" ]]; then
+        last=$(cat "$stamp" 2>/dev/null || echo 0)
+      fi
+      # Avoid spamming: at most once every 5 minutes
+      if (( now - last >= 300 )); then
+        echo "$now" > "$stamp"
+        swaynag -t warning -m "Battery low: ''${capacity}% - plug in the charger." -b "Dismiss" "true" &
+        disown || true
+      fi
+    fi
+  '';
+
 
   sway-conf = builtins.readFile ./sway.conf + ''
     exec swaybg -m center -c 252525 -i ~/.wallpaper.png
@@ -32,6 +70,7 @@ in {
     waybar
     wayland
     wofi
+    battery-alert-swaynag
   ];
 
   programs.sway = {

hosts/nb/users/codex-cli.nix

@@ -0,0 +1,49 @@
+{ config, lib, pkgs, ... }:
+let
+  user = "dominik";
+  home = "/home/${user}";
+  npmPrefix = "${home}/.npm-global";
+  node = pkgs.nodejs; # or pkgs.nodejs_20
+in {
+  home-manager.users.dominik = { lib, pkgs, ... }: {
+    home.packages = with pkgs; [
+      node
+      gnutar     # provides `tar`
+      gzip       # provides `gzip` used by tar
+      unzip  
+      python314  # useful for codex model use
+      jq         # useful for JSON processing
+    ];
+
+    # Ensure ~/.npmrc with a user prefix (no sudo needed)
+    home.file.".npmrc"= {
+      text = ''
+        prefix=${npmPrefix}
+      '';
+      force  = true;
+    };
+
+
+    # Ensure the npm bin dir is on PATH for all shells
+    home.sessionPath = [
+      "${npmPrefix}/bin"
+    ];
+
+    # Nice-to-have: visible variables in the shell
+    home.sessionVariables = {
+      NPM_CONFIG_PREFIX = npmPrefix;
+    };
+
+    # Auto-install @openai/codex if it's not already there
+    # (idempotent on each `home-manager switch`)
+    home.activation.installCodexCli = lib.hm.dag.entryAfter [ "writeBoundary" ] ''
+      export PATH=${node}/bin:${pkgs.gnutar}/bin:${pkgs.gzip}/bin:${pkgs.unzip}/bin:${pkgs.curl}/bin:$PATH
+      mkdir -p ${npmPrefix}
+      if ! command -v codex >/dev/null 2>&1; then
+        echo "Installing @openai/codex globally..."
+        # --global uses prefix from ~/.npmrc; PATH has node for postinstall
+        ${node}/bin/npm install -g @openai/codex
+      fi
+    '';
+  };
+}

hosts/nb/users/dominik.nix

@@ -79,6 +79,10 @@ let
     "media.ffmpeg.vaapi-drm-display.enabled" = true;
     "gfx.webrender.all" = true;
     "xpinstall.signatures.required" = false;
+    "layers.acceleration.disabled" = false;
+    "gfx.webrender.force-disabled" = false;
+    "gfx.webrender.software" = false;
+    "gfx.webrender.compositor" = true;
   };
 
   # firefoxUserChrome = ''
@@ -147,6 +151,9 @@ let
   persistHome = "/home/dominik";
 in
 {
+  imports = [
+    ./codex-cli.nix
+  ];
 
   sops.secrets.openai_api_key = {
     owner = "dominik";
@@ -442,6 +449,32 @@ in
           };
         };
       };
+      "office@scana11y.com" = {
+        realName = "Dominik Polakovics";        
+        address = "office@scana11y.com";
+        userName = "office@scana11y.com";
+        imap = {
+          host = "imap.cloonar.com";
+          port = 993;
+        };
+        smtp = {
+          host = "mail.cloonar.com";
+          port = 587;
+          tls = {
+            enable = true;
+            useStartTls = true;
+          };
+        };
+        thunderbird = {
+          enable = true;
+          profiles = [ "cloonar" "work" ];
+          settings = id: {
+            "mail.identity.id_${id}.reply_on_top" = 1;
+            "mail.identity.id_${id}.sig_bottom" = false;
+            "mail.identity.id_${id}.htmlSigFormat" = true;
+          };
+        };
+      };
       "dominik.polakovics@epicenter.works" = {
         realName = "Dominik Polakovics";        
         address = "dominik.polakovics@epicenter.works";

hosts/web-arm/configuration.nix

@@ -38,6 +38,7 @@
     # comment out for first build, so ssh key and config is present
     # otherwise the build will fail
     ./modules/sa-core.nix
+    ./modules/scana11y.nix
     
   ];
 

hosts/web-arm/modules/sa-core.nix

@@ -1,48 +1,123 @@
-{ config, pkgs, ... }:
+{ config, lib, pkgs, ... }:
+
+with lib;
+
+let
+  cfg = config.services.sa-core;
+
+  instanceOpts = { name, ... }:
+    {
+      options = {
+        domain = mkOption {
+          type = types.nullOr types.str;
+          default = null;
+          description = lib.mdDoc ''
+            Domain of the website to scan. Defaults to attribute name in instances.
+          '';
+          example = "example.org";
+        };
+
+        email = mkOption {
+          type = types.str;
+          default = "office@scana11y.com";
+          description = lib.mdDoc ''
+            Email where to send scan reports.
+          '';
+          example = "example.org";
+        };
+
+        maxPages = mkOption {
+          type = types.int;
+          default = 100;
+          description = lib.mdDoc ''
+            Maximum number of pages to scan.
+          '';
+          example = "100";
+        };
+
+        timerConfig = mkOption {
+          type = types.attrs;
+          default = {
+            OnCalendar = "monthly";
+            Persistent = true;
+            RandomizedDelaySec = "1h"; # spread load a bit
+          };
+          description = lib.mdDoc ''
+            Configuration for the systemd timer.
+          '';
+        };
+      };
+    };
+in
 {
-  virtualisation = {
-    docker.enable = true;
-  };
-
-  users.users.scana11y_com.extraGroups = [ "docker" ];
-
-  systemd.services."scana11y-wohnservice-wien.at" = {
-    description = "ScanA11y wohnservice-wien.at";
-    wants = [ "docker.service" ];
-    after = [ "docker.service" "network-online.target" ];
-    serviceConfig = {
-      Type = "oneshot";
-      User = "scana11y_com";
-    };
-
-    path = [ pkgs.docker pkgs.wkhtmltopdf ];
-
-    script = ''
-      exec ${pkgs.sa-core}/bin/sa-core scan \
-        -domain=wohnservice-wien.at \
-        -depth=3 \
-        -max-pages=100 \
-        -image=cloonar/sa-core:v0.1.3 \
-        -output=/var/www/scana11y.com/reports \
-        -wkhtmltopdf=${pkgs.wkhtmltopdf}/bin/wkhtmltopdf \
-        -email-server=imap.cloonar.com \
-        -email-username=office@scana11y.com \
-        -email-password-file=${config.sops.secrets.sa-core-mailpw.path} \
-        -email-sender=office@scana11y.com \
-        -email-recipient=dominik.polakovics@cloonar.com \
-        -keep 6 \
-        -webroot=https://scana11y.com/reports
-    '';
-  };
-
-  systemd.timers."scana11y-wohnservice-wien.at" = {
-    wantedBy = [ "timers.target" ];
-    timerConfig = {
-      OnCalendar = "monthly";
-      Persistent = true;
-      RandomizedDelaySec = "1h"; # spread load a bit
+  options.services.sa-core = {
+    instances = mkOption {
+      type = types.attrsOf (types.submodule instanceOpts);
+      default = {};
+      description = lib.mdDoc "Define ScanA11y instances here.";
+      example = literalExpression ''
+        {
+          "example.org" = {
+            domain = "example.org";
+            email = "test@example.org";
+          };
+        }
+      '';
     };
   };
 
-  sops.secrets.sa-core-mailpw.owner = "scana11y_com";     # written as root at activation
+  config = {
+    virtualisation = {
+      docker.enable = true;
+    };
+
+    systemd.timers = mapAttrs' (instance: instanceOpts:
+      let
+        domain = if instanceOpts.domain != null then instanceOpts.domain else instance;
+      in
+      nameValuePair ("sa-core-" + domain) {
+        wantedBy = [ "timers.target" ];
+        timerConfig = instanceOpts.timerConfig;
+      }
+    ) cfg.instances;
+
+    systemd.services = mapAttrs' (instance: instanceOpts:
+      let
+        domain = if instanceOpts.domain != null then instanceOpts.domain else instance;
+        maxPages = if instanceOpts.maxPages != null then toString instanceOpts.maxPages else "100";
+      in
+      nameValuePair ("sa-core-" + domain) {
+        description = "ScanA11y ${domain}";
+        wants = [ "docker.service" ];
+        after = [ "docker.service" "network-online.target" ];
+        serviceConfig = {
+          Type = "oneshot";
+          User = "scana11y_com";
+          Group= "nginx";
+          SupplementaryGroups = "docker";
+        };
+
+        path = [ pkgs.docker pkgs.wkhtmltopdf ];
+
+        script = ''
+          exec ${pkgs.sa-core}/bin/sa-core scan \
+            -domain=${domain} \
+            -depth=3 \
+            -max-pages=${maxPages} \
+            -image=cloonar/sa-core:v0.1.3 \
+            -output=/var/www/scana11y.com/public/reports \
+            -wkhtmltopdf=${pkgs.wkhtmltopdf}/bin/wkhtmltopdf \
+            -email-server=imap.cloonar.com \
+            -email-username=office@scana11y.com \
+            -email-password-file=${config.sops.secrets.sa-core-mailpw.path} \
+            -email-sender=office@scana11y.com \
+            -email-recipient=${instanceOpts.email} \
+            -keep 6 \
+            -webroot=https://scana11y.com/reports
+        '';
+      }
+    ) cfg.instances;
+
+    sops.secrets.sa-core-mailpw.owner = "scana11y_com";
+  };
 }

hosts/web-arm/modules/scana11y.nix

@@ -0,0 +1,8 @@
+{ config, pkgs, ... }:
+{
+  services.sa-core.instances = {
+    "wohnservice-wien.at" = {
+      email = "dominik.polakovics@cloonar.com";
+    };
+  };
+}

hosts/web-arm/pkgs/sa-core.nix

@@ -2,13 +2,13 @@
 let
   saRepoSrc = builtins.fetchGit {
     url = "ssh://gitea@git.cloonar.com/ScanA11y/sa-core.git";
-    rev = "daf955c2dffb5d27593746274c33e6e3043c8227";
+    rev = "0d33fdb79b62c270d230ad307341ae107be96600";
   };
 in
 
 buildGoModule rec {
   pname = "sa-core";
-  version = "0.1.0";
+  version = "0.3.2";
 
   src = saRepoSrc;
 

hosts/web-arm/sites/scana11y.com.nix

@@ -9,7 +9,7 @@ in {
     enableACME = true;
     acmeRoot = "/var/lib/acme/acme-challenge";
 
-    root = "${dataDir}";
+    root = "${dataDir}/public";
 
     locations."/favicon.ico".extraConfig = ''
       log_not_found off;