substitutions:
  device_name: "bathroom-bulb-2"
  friendly_name: "Bathroom Bulb 2"

esphome:
  name: ${device_name}
  comment: ${friendly_name}
  on_boot:
    priority: 300
    then:
      - light.turn_on: 
          id: my_light
      - delay: 100ms
      - light.turn_on:
          id: my_light
          brightness: 30%
      - delay: 100ms
      - light.turn_on:
          id: my_light
          red: 100%
          green: 50%
          blue: 0%
          white: 100%

esp8266:
  board: esp01_1m
          
interval:
  - interval: 15s
    then:
      - if:
          condition:
            api.connected: # check if api connected
          else:
            - light.turn_on:
                id: my_light
                brightness: 100%

# Enable Home Assistant API
api:
  batch_delay: 0ms

ota:
  platform: esphome

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  fast_connect: True
  domain: .cloonar.smart

light:
  - platform: rgbw
    id: my_light
    name: ${friendly_name}
    red: pwm_r
    green: pwm_g
    blue: pwm_b
    white: pwm_w

output:
  - platform: esp8266_pwm
    pin: GPIO13
    frequency: 1000 Hz
    id: pwm_r

  - platform: esp8266_pwm
    pin: GPIO12
    frequency: 1000 Hz
    id: pwm_g

  - platform: esp8266_pwm
    pin: GPIO14
    frequency: 1000 Hz
    id: pwm_b

  - platform: esp8266_pwm
    pin: GPIO5
    frequency: 1000 Hz
    id: pwm_w